[Asterisk-Users] ATA186 through NAT, over Dialup, success story

[Dan]

Hi,

If SIP is used, then with Outbound Proxy it works for inbound calls too.

BR,
Dan
----- Original Message -----
From: "Humberto Atristain" <hatristain at megahospedaje.com>
To: <asterisk-users at lists.digium.com>
Sent: Wednesday, May 21, 2003 12:33 AM
Subject: RE: [Asterisk-Users] ATA186 through NAT, over Dialup, success story


> to all guys Windows XP, has a PORT MAPPING feature on the Advanced
settings
> so you can Dialup on a Laptop and "Share" to an ATA-186 it works I use it
> everyday for demos to customers, my only question is INBOUND I dont know
if
> it works
>
> Humberto
>
> -----Mensaje original-----
> De: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com]En nombre de Florian
> Overkamp
> Enviado el: Martes, 20 de Mayo de 2003 11:30 a.m.
> Para: asterisk-users at lists.digium.com
> Asunto: Re: [Asterisk-Users] ATA186 through NAT, over Dialup, success
> story
>
>
> At 16:50 20-5-2003 +0100, you wrote:
> >I'm away at a conference in Amsterdam.  My home is in Cambridge in the
> >UK.  On a whim, I tossed an ATA186 and a phone into my bags before
> >leaving home.
> >
> >I was able to plug my ATA186 into a LAN here at the conference and
> >was connected to my home Asterisk in a few seconds.  Total time from
> >unzipping my bag to talking to home no more than 15 seconds.
> >
> >OK, so the kit could be more portable, but that is coming !
> >
> >Also, in the hotel there is dialup only.  But, I dialled up with my
> >Apple ibook, enabled connection sharing, connected the ATA186 to the
> >ibook Ethernet port and similarly had dialtone in a few seconds.
> >
> >I made calls over that - using a low-bandwidth codec - and it worked
> >great too.  That was also a NATted connection.
> >
> >I knew it would work in theory, but the ease in practice was amazing.
>
> This is a great proof of concept and quite contradictory to my own
> experience. Could you elaborate a bit more, i.e. by specifying your
> sip.conf and the ATA firmware, revision, and configuration ? I'd love to
> compare notes..
>
> Florian
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>