[Asterisk-Users] ATA186 through NAT, over Dialup, success story

[Humberto Atristain]

to all guys Windows XP, has a PORT MAPPING feature on the Advanced settings
so you can Dialup on a Laptop and "Share" to an ATA-186 it works I use it
everyday for demos to customers, my only question is INBOUND I dont know if
it works

Humberto

-----Mensaje original-----
De: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]En nombre de Florian
Overkamp
Enviado el: Martes, 20 de Mayo de 2003 11:30 a.m.
Para: asterisk-users at lists.digium.com
Asunto: Re: [Asterisk-Users] ATA186 through NAT, over Dialup, success
story


At 16:50 20-5-2003 +0100, you wrote:
>I'm away at a conference in Amsterdam.  My home is in Cambridge in the
>UK.  On a whim, I tossed an ATA186 and a phone into my bags before
>leaving home.
>
>I was able to plug my ATA186 into a LAN here at the conference and
>was connected to my home Asterisk in a few seconds.  Total time from
>unzipping my bag to talking to home no more than 15 seconds.
>
>OK, so the kit could be more portable, but that is coming !
>
>Also, in the hotel there is dialup only.  But, I dialled up with my
>Apple ibook, enabled connection sharing, connected the ATA186 to the
>ibook Ethernet port and similarly had dialtone in a few seconds.
>
>I made calls over that - using a low-bandwidth codec - and it worked
>great too.  That was also a NATted connection.
>
>I knew it would work in theory, but the ease in practice was amazing.

This is a great proof of concept and quite contradictory to my own
experience. Could you elaborate a bit more, i.e. by specifying your
sip.conf and the ATA firmware, revision, and configuration ? I'd love to
compare notes..

Florian


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users