[Asterisk-Users] Error with WCFXO and WCFXS

[tmassey at obscorp.com]

asterisk-users-admin at lists.digium.com wrote on 05/19/2003 11:45:21 PM:

> > The problem is not that the channel doesn't exist: it does.  Asterisk
> > even thinks it's dialing it.  It also thinks it's busy later...
> 
> In that case, I noticed that when I first installed the hardware, the
> led seemed to come on on one of the ports.  I plugged the phone into
> that port.  I sat down and figured out how to load the drivers and
> startup asterisk. 
> 
> With asterisk running I had no juice (electricity) to the phone.  (You
> can tell when the phone is powered even when there is no dial-tone.)
> When I pulled the machine out, the port that was lighted was at the
> far end of the card from the phone line. 
> 
> Maybe I just plugged the phone into the wrong port originally.  Maybe
> it was a figment of my imagination.  The machine is in an inconvenient
> location.  Small apartment.

Well, I know that I was plugging it into the correct, lit-led port, but I 
too have no juice.  Dead phone:  no echo, no lit numbers, etc.  I've tried 
several phone cables (including one with an RJ-45 end) and phones to no 
avail.  I don't know what else to try:  it's a very simple configuration 
lifted 100% from the FAQ, yet it doesn't work.

Sigh.

Tim Massey
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030519/b796d3f5/attachment.htm