[Asterisk-Users] little ADSI problem

[Joe Antkowiak]

A normal tone phone *does* work on that same port (way ahead of you), and
the adsi phone works fine on a normal telco POTS line (minus the features)

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Gary
Sent: Monday, May 19, 2003 8:54 AM
To: asterisk-users at lists.digium.com
Subject: RE: [Asterisk-Users] little ADSI problem

forget the fact is an ADSI phone,

if it wont work like a normal phone it is probably stuffed.

Start with the basics and get that working, then work up...

got a normal tone phone, does it work properly on that port ?

then continue etc.....

On Mon, 19 May 2003 08:43:16 -0400, Joe Antkowiak wrote:

>>> My problem is, it appears as if the phone and asterisk can't understand
>each
>>> other.  The port the phone is connected to always remains off-hook (I
>hear
>>> this is standard for adsi?).
>>No.  The phone should be onhook unless it's pioked up.  I think this may
>>be an indication that your signalling is not set up correctly.
>
>
>>Actually, if the lights are on all the time, it means the phone is NOT
>>connected to the line !!
>
>The phone *is* connected to the zaptel card, and I am getting a dialtone,
so
>I'm assuming my problem is the code/fdn I have set in asterisk.adsi...
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users

.



_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users