[Asterisk-Users] Call between G.711 and GSM

[Jamie Carl]

*This message was transferred with a trial version of CommuniGate(tm) Pro*
Will asterisk actually convert between two different codecs?????
ie, a SIP endpoint running GSM and another running G.711?

Wouldn't that add quite some latency?  I was always under the impression
Asterisk did not recompress and was smart enough to negotiate the right
codec at each end and just pass through the RTP packets.

Regards,

Jamie Carl
Email:	me at jazz-inc.net
PH:		+61-414-365-466

-----Original Message-----
From: Tjardick van der Kraan [mailto:tjardick at vanderkraan.net]
Sent: Monday, 19 May 2003 9:00 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Call between G.711 and GSM


*This message was transferred with a trial version of CommuniGate(tm)
Pro*
The GSM codec in X-Lite is not compatible with the GSM codec used in *.

I know X-ten is working on a new versio with a different code instead of
GSM...

Greetings,

Tjardick

----- Original Message ----- 
From: "Dan" <dtoma at fx.ro>
To: <asterisk-users at lists.digium.com>
Sent: Monday, May 19, 2003 12:36 PM
Subject: [Asterisk-Users] Call between G.711 and GSM


> Hi all,
>
> I have a Cisco 7960 IP PHONE and an X-Lite soft phone, both connected
to
an
> Asterisk PBX as SIP phones.
> If G.711 codec is used by both phones (GSM codec disabled on X-Lite),
the
> sound is perfect.
> When I enable GSM on X-Lite, it tends to use it for any call and then
> Asterisk make a conversion between GSM and G.711 (I'm right with this
> one???).
> The call is established, 7960 display the used codec as G.711 and
X-Lite
as
> GSM, but all I can hear is only a lot of noise. The music on hold
feature
> works ok on both sides.
>
> How can I do to use this type of configuration?
> 7960 does not have GSM codec, nor G.723 and I have no G.729 on X-Lite.
> I want to be able to use it where G.711 is not suitable because of the
> available bandwidth.
> Cisco 7960 is in the same LAN as Asterisk PBX, but X-Lite client ie
> remotely, over a not so good link (but perfect for GSM codec).
> Any suggestions?
>
> Thanks,
> Dan
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users