[Asterisk-Users] DECT to Voip gateway

[Dan]

Hi Steven,

You're right.
Unfortunatelly, the main issue for me is that both ATA and TDMxx are not
available here and the transport cost if ordered in US is much to big.
I have the opportunity to test ATA-186 with SIP image and the quality is
excellent even using a low cost analog phone.

BR,
Dan

----- Original Message ----- 
From: "Steven Critchfield" <critch at basesys.com>
To: <asterisk-users at lists.digium.com>
Sent: Sunday, May 18, 2003 6:36 PM
Subject: Re: [Asterisk-Users] DECT to Voip gateway


> On Sun, 2003-05-18 at 07:43, Dan wrote:
> > Hi,
> >
> > Take a look at those one too.
> > http://www.yoda.com.tw/
> >
> > VG-100TA IP Telephone Adapter is available here, in Romania, for about
> > 89USD+VAT.
> > It is a lot cheaper than Cisco ATA-186 (around 170USD here) and provides
> > allmost the same functionality.
> > It supports SIP, H.323 and MGCP (optional) with all well known codec.
> >
> > BR,
> > Dan
> > P.S. It is cheaper than TDM10B too...;-)
>
> while yes it is ceaper tha a ATA, it is only half of an ATA. To compare
> apples to apples would require you get 2 of those VG-100TAs, at a cost
> of $178USD+VAT compared to the ~$170. Sounds pretty close. As to the
> comparison to the TDM10B, The TDM set up is priced to be cheaper per
> port when fully deployed. Example 4 ports of TDM is $305, or $76.25 per
> port. Even at 3 ports for $245, you get a per port cost of $81.67. All
> of thee numbers below the cost of the VG100TA, and is a better option
> for asterisk development.
> -- 
> Steven Critchfield <critch at basesys.com>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>