[Asterisk-Users] SIP/H323 based channel bank?

[Dave Packham]

Thanks for all the info 

I just want to extend my well (PRI) connected redundant * servers to buildings via IP backbone....  

:)

Dave

>>> trclark at shaw.ca 5/16/2003 12:01:25 PM >>>

-----Original Message-----
From: Steven Critchfield <critch at basesys.com>
To: asterisk-users at lists.digium.com <asterisk-users at lists.digium.com>
Date: May 16, 2003 10:48 AM
Subject: Re: [Asterisk-Users] SIP/H323 based channel bank?


>On Fri, 2003-05-16 at 11:29, TC wrote:
>> >Couple of things. First to answer exactly what your question was.
>> >Carrier Access Adit 600 has the ability to add a router card to it.
>> That is kinda interesting so if i have a T1 feed from my fav provider
>> that is split as say 16 channels of voice & the rest for data.
>> Can I use 1 of the built in T1 ports for the T1 from the provider(Voice,
>> Data) then configure
>> the ADIT to spit out those 16 voice channels on the other builtin T1
>> interface to my
>> * Box & dump the balance to the router card & plug that in to a regular
>> eithernet switch ??
>
>Since the ADIT doesn't seem to have any limitations on cross connects,
>you can do many things. But if you are just wanting to split data from
>voice, why bother getting the CB when the Digium card can do that too
>and replace your router.
-still need to drive FXS stations
-don't want my PBX doing data routing
-minor issue in ca no telco approval, so can just pt the T1 into the CSA
approved ADIT 600 :)




_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com 
http://lists.digium.com/mailman/listinfo/asterisk-users