[Asterisk-Users] invalid argument 22 when modprobe wcfxs and wcfxo

[Martin Pycko]

We need your zaptel.conf config file

/etc/asterisk/zapata.conf is for asterisk and zaptel.conf is for zaptel
drivers

Martin

On Wed, 14 May 2003, Robert Boardman wrote:

> Thanks for your reply
>
> Here is Zapata.conf
> [channels]
> signalling=fxs_ks
> context=incoming
> channel=>1 ;X100P
> context=internal
> signalling=fxo_ks
> channel=>2 ;tdm100b
>
> here is zaptel.conf
> fxsks=1 #X100P
> fxoks=2 #tdm100
> defaultzone=uk
> loadzone=uk
>
> here is the output from ztcfg
>
> root at slackware:~# ztcfg -vv
>
> Zaptel Configuration
> ======================
>
>
> Channel map:
>
> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> Channel 02: FXO Kewlstart (Default) (Slaves: 02)
>
> 2 channels configured.
>
> Notice: Configuration file is /etc/zaptel.conf
> line 4: Unable to open master device '/dev/zap/ctl'
>
> Here is the output from modprobe of wcfxo and wxfxs
>
> root at slackware:~# modprobe wcfxs
> ZT_CHANCONFIG failed on channel 1: Invalid argument (22)
> /lib/modules/2.4.20/misc/wcfxs.o: post-install wcfxs failed
> /lib/modules/2.4.20/misc/wcfxs.o: insmod wcfxs failed
> root at slackware:~# modprobe wcfxo
> ZT_CHANCONFIG failed on channel 1: Invalid argument (22)
> /lib/modules/2.4.20/misc/wcfxo.o: post-install wcfxo failed
> /lib/modules/2.4.20/misc/wcfxo.o: insmod wcfxo failed
> root at slackware:~#
>
> Does anyone have any advice  how to get the driver loaded
>
> Ps I'm using slakeware 9.0 and it has been working before
>
> Robb
>
> Quoting Iain Stevenson <iain at iainstevenson.com>:
>
> >
> >
> > --On Wednesday, May 14, 2003 12:52 am +0100 Robert Boardman
> > <robb at 20tauntongrove.net> wrote:
> >
> > >
> > > I ahve been having problems loading the wcfss and wcfxo drivers
> > >
> >
> > The output of lsmod that you included shows that the modules are loading -
> > so it's more likely a configuration error in zaptel.conf and/or
> > zapata.conf.  You could post those files to the list to see if anyone can
> > spot a problem.
> >
> > > I get an error message invalid argument and something about post install
> > > insmod failed
> > >
> >
> > When do you get this error message?  If you do ztcfg -vvv what is the
> > result?
> >
> > >
> > >
> > > is the problem that the hisax isdn drivers have loaded?
> > > if so how do I stop them loading?
> >
> > hisax isn't the problem.  Asterisk interfaces to passive ISDN card (eg
> > hisax) through a modem interface which is outside the zaptel framework.
> > There is no interaction between zaptel and hisax drivers.
> >
> >   Iain
> >
> >
> >
> >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>