[Asterisk-Users] Serious problem with z-plex 10

[Wade Weppler]

We had a slightly similar problem with our Zplex10.  The power supply died
and we had to replace it.  :(  It got progressively worse until no lights
came on and the fans spun really slowly.

You might also want to check that your connection cable is correct and has a
sure connection...

-wade

> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com [mailto:asterisk-users-
> admin at lists.digium.com] On Behalf Of Eris Riswanto
> Sent: Monday, March 31, 2003 8:22 PM
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] Serious problem with z-plex 10
> 
> 
> |Do not plug in ethernet cable at all, even if the interface is down.
> |
> |The long time to come up is due to the software being verified, and then
> |booted. It is that way on many channel banks.
> |
> |Also it could mean the zplex is not happy with the line coding it is
> |getting. It is a very sensitive device and flakes out if it doesn't get
> |good signal.
> |--
> |Steven Critchfield  <critch at basesys.com>
> |
> 
> The ethernet port from the device doesn't even connected to network.
> But i did  configure the ethernet interface. I think the device
> mess up with the network configuration.
> How can i get back the device to original configuration?
> Anybody experienced with it, or any good idea to fix this problem?
> 
> Thanks in advance
> 
> Eris Riswanto
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users