[Asterisk-Users] iconnect quality?

[Dan Fernandez]

Iconnect uses codecs g723 and g711 that can be configured for each account
(you can change them by the 7777 prefix)

With their dialer and g723 I can here just fine (I  have a 64k broadband
connection). With their dialer and g711 the quality suffers greatly.

With * and GSM I cannot here anything (and don´t know if they can here me).
The call gets logged on  iconnect´s CDR. Upon looking at the SIP debug
everything appears just fine, but again, I cannot hear anything.

With * and ulaw or mlaw I can hear the first 5 secs and nothing else.

I have tried FWD (not going through *) which uses g711 and I have had nor
problem whatsoever.

----- Original Message -----
From: "Jim Archer" <jim at archer.net>
To: <asterisk-users at lists.digium.com>
Sent: Monday, March 10, 2003 8:51 AM
Subject: [Asterisk-Users] iconnect quality?


> Does anyone here use iconnect regularly with Asterisk?  If so, what do you
> think of its reliability and quality?  I used up my 10 free minutes just
> getting it to work.
>
> By the end it was working, but I found that (1) many calls did not
connect,
> due to a variety of errors reported by them (service unavailable and such)
> and (2) when I did connect, I could be heard but I could not hear the
> person I was talking to.
>
> I would appreciate hearing any experiences.
>
> Thanks!
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>