[Asterisk-Users] Using asterisk with ISDN - How to configure

[Klaus-Peter Junghanns]

Hi Cristoph,

the B1 has linux capi 2.0 drivers, so you can use chan_capi.
Grab it at http://www.junghanns.net/chan_capi.html
read INSTALL and README, take a look at the sample configuration
file capi.conf.

regards
kapejod

-- 
Klaus-Peter Junghanns

CEO,CTO
Junghanns.NET Internet-Services & Software-Development GmbH
Breite Strasse 13 - 12167 Berlin - Germany
fon:	+49 30 79705392
fax:	+49 30 79705391
mobile:	+49 160 7503372
email:	kpj at junghanns.net


Am Mon, 2003-03-03 um 21.56 schrieb Christoph Schütz:
> Hello,
> 
> first of all I have to say: I read the handbook but there are some questions 
> left I couldn't answer. It's very basicaly. Sorry about that.
> 
> I have a AVM B1 PCI - Card. I think there is a I4L and a Capi-Port installed.
> 
> 1.  How can I define the right channels, how are they defined. I found the 
> modem.conf example with an ISDN section but how can I make asterisk load it?
> 
> 2. Do I have to compile Zaptel, zapata or libpri ?
> 
> 3. How can I dial, if I have configured anything. Is it only possible by using 
> the console or is there any frontend?
> 
> If there is somebody out there who solved this and has configuration files, I 
> would be pleased to get them as an example. 
> 
> Thanks for help Christoph
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users