AW: [Asterisk-Users] help with pri configuration..

Martin Pycko martinp at digium.com
Mon Jun 23 07:29:02 MST 2003


Well how did you solve your previous problem then ?

Martin

On Mon, 23 Jun 2003, Thomas Haeger wrote:

> The problem before is solved. But now gives another problem ...
>
>
>
>   == Registered channel type 'Zap' (Zapata Telephony Driver w/PRI)
>   == Registered channel type 'Tor' (Zapata Telephony Driver w/PRI)
>   == Starting D-Channel on span 1
> ERROR[1024]: File chan_zap.c, Line 5947 (start_pri): Unable to open
> D-channel 47 (Device or resource busy)
> ERROR[1024]: File chan_zap.c, Line 6682 (load_module): Unable to start
> D-channel on span 2
> WARNING[1024]: File loader.c, Line 299 (ast_load_resource): chan_zap.so:
> load_module failed, returning -1
> WARNING[1024]: File loader.c, Line 394 (load_modules): Loading module
> chan_zap.so failed!
>
> All channels are registered successfully before. But then this error occur.
> I tried to deactivate following ports (spans)
>
> 	1. second one
>
> but then the same message occure with the next dchannel
>
> and so on.
>
> Only the first one works.
>
> What's wrong now?
>
>
> Thanks,
>
> Thomas.
>
>
> -----Ursprüngliche Nachricht-----
> Von: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com]Im Auftrag von Thomas
> Haeger
> Gesendet: Montag, 23. Juni 2003 11:34
> An: Asterisk User
> Betreff: [Asterisk-Users] help with pri configuration..
>
>
> Hi all,
>
> can somebody help me with pri configuration?
>
> Here my zapata.conf:
>
>
> ; Zapata telephony interface
> ;
> ; Configuration file
>
> [channels]
>
> switchtype=euroisdn
> signalling=pri_cpe
>
>
> ;group=1
> channel => 1-15,17-31
>
> ;group=2
> channel =>32-46,48-62
>
> ;group=3
> channel => 63-77,79-93
>
> ;group=4
> channel => 94-108,110-124
>
>
>
> And here my zaptel.conf:
>
> zaptel.conf         [----]  0 L:[  1+ 0   1/ 18] *(0   / 227b)= .  10 0x0A
>
> span=1,0,0,ccs,hdb3 #,crc4
> span=2,0,0,ccs,hdb3 #,crc4
> span=3,0,0,ccs,hdb3 #,crc4
> span=4,0,0,ccs,hdb3 #,crc4
>
>
>
>
> bchan=1-15,,32-46,63-77,94-108
> dchan=16,47,78,109
> bchan=17-31,48-62,79-93,110-124
>
> And here the messages after starting astersik:
>
> loadzone = fr
> defaultzone=us
>
>  [chan_zap.so] => (Zapata Telephony w/PRI)
>   == Parsing '/etc/asterisk/zapata.conf': Found
>     -- Registered channel 1, PRI Signalling signalling
>     -- Registered channel 2, PRI Signalling signalling
>     -- Registered channel 3, PRI Signalling signalling
>     -- Registered channel 4, PRI Signalling signalling
>     -- Registered channel 5, PRI Signalling signalling
>     -- Registered channel 6, PRI Signalling signalling
>     -- Registered channel 7, PRI Signalling signalling
>     -- Registered channel 8, PRI Signalling signalling
>     -- Registered channel 9, PRI Signalling signalling
>     -- Registered channel 10, PRI Signalling signalling
>     -- Registered channel 11, PRI Signalling signalling
>     -- Registered channel 12, PRI Signalling signalling
>     -- Registered channel 13, PRI Signalling signalling
>     -- Registered channel 14, PRI Signalling signalling
>     -- Registered channel 15, PRI Signalling signalling
>     -- Registered channel 17, PRI Signalling signalling
>     -- Registered channel 18, PRI Signalling signalling
>     -- Registered channel 19, PRI Signalling signalling
>     -- Registered channel 20, PRI Signalling signalling
>     -- Registered channel 21, PRI Signalling signalling
>     -- Registered channel 22, PRI Signalling signalling
>     -- Registered channel 23, PRI Signalling signalling
>     -- Registered channel 24, PRI Signalling signalling
>     -- Registered channel 25, PRI Signalling signalling
>     -- Registered channel 26, PRI Signalling signalling
>     -- Registered channel 27, PRI Signalling signalling
>     -- Registered channel 28, PRI Signalling signalling
>     -- Registered channel 29, PRI Signalling signalling
>     -- Registered channel 30, PRI Signalling signalling
> ERROR[1024]: File chan_zap.c, Line 4757 (mkintf): Signalling requested is
> PRI Signalling but line is in Unkn
> own signalling 896 signalling
> ERROR[1024]: File chan_zap.c, Line 6403 (load_module): Unable to register
> channel '1-15'
> WARNING[1024]: File loader.c, Line 299 (ast_load_resource): chan_zap.so:
> load_module failed, returning -1
> WARNING[1024]: File loader.c, Line 394 (load_modules): Loading module
> chan_zap.so failed!
>
>
>
> Whats wrong ?
>
>
>
> Thanks for help,
>
> Thomas.
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>





More information about the asterisk-users mailing list