[Asterisk-Users] ISDN Fritz & RedHat 8.0

[WipeOut .]

The ISDN tools are in the package isdn4kutils..

Not sure about the error you are getting when you run "make" do you have the kernel-source installed?

> I would like to use the CAPI drivers and I have downloaded the drivers
> from the AVM site but when I do a "make" in the fritz directory it exits
> with :
> 
> make[1]: *** [tools.o] Error 1
> make[1]: Leaving directory `/usr/src/fritz/src.drv'
> make: *** [drv] Error 2
> 
> I guess that this is because I don't have ISDN tools loaded correctly. I
> have tried "modprobe isdn" but there is still not difference.
> 
> How do I make sure that I have the ISDN tools loaded correctly ?
> 
> Does the standard RH 8.0 kernel have precompiled the right options ?
> 
> Thanks for your help.
> 
> Stuart
> 
> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of WipeOut .
> Sent: 28 July 2003 08:01
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] ISDN Fritz & RedHat 8.0
> 
> 
> I have set one up on RH9 but I am sure the process is the same.. its not
> very well documented I am afraid..
> 
> Basically download the CAPI drivers from the AVM site..
> 
> Extract them and then run "make" and then "make install"..
> 
> Make sure you have the ISDN tools loaded..
> 
> Create a file in etc called capi.conf and put the following line into
> it..
> fcpci     -     -     -     -     -     -
> 
> Save it and then try capiinit start..
> 
> It will complain that the module will taint the kernel but it still
> works..
> 
> then to verify its loaded run "capiinfo"
> 
> Hope that helps..
> 
> 
> > Has anyone got the BT Speedway (AVM Fritz) card working on a RedHat 
> > 8.0 system with *.
> >  
> > If so could someone give me some pointers on getting the right 
> > sequence of installing the drivers and which versions to use.
> >  
> > Thanks,
> >  
> > Stuart
> 
> -- 
> ______________________________________________
> http://www.linuxmail.org/
> Now with e-mail forwarding for only US$5.95/yr
> 
> Powered by Outblaze _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users

-- 
______________________________________________
http://www.linuxmail.org/
Now with e-mail forwarding for only US$5.95/yr

Powered by Outblaze