[Asterisk-Users] Newbie Doubts

[Joe Antkowiak]

Because a channel bank converts a DS1 into 24 DS0s and vice versa.  Your
channel bank may have an Ethernet port on it, but it is just for management.

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Ricardo Saar
Gemignani
Sent: Monday, July 07, 2003 12:44 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Newbie Doubts

Can´t I connect to the channel bank using ethernet? Why?

----- Original Message -----
From: "Martin Pycko" <martinp at digium.com>
To: <asterisk-users at lists.digium.com>
Sent: Monday, July 07, 2003 11:52 AM
Subject: Re: [Asterisk-Users] Newbie Doubts


> You plug a channel bank to a T1 in your PC connected either over T100P or
> T400P.
>
> regards
> Martin
>
> On Mon, 7 Jul 2003, Ricardo Saar Gemignani wrote:
>
> > Hello everybody
> >
> >     My doubt is about configuration. Can I use a channel bank like
zplex-10 or adtran, plug on it an T1, 24 POTS, an ethernet cable connected
at the computer with Asterisk installed? Will it work? Will asterisk be able
to control the system? Receive a call and work with all its
functions(transfer, conference, voice mail)?
> >
> > Thanks in advance,
> > Ricardo Saar Gemignani
> >
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users