[Asterisk-Users] IAX NOTICE and WARNING messages

Brent Franks mwless at mindworks.net
Thu Dec 25 12:50:37 MST 2003


Hi Brian, Thanks for the help.

I've changed the ports on the registration statements, however I still
receive the last two error messages.  The first two are gone.

WARNING[1142106560]: File chan_iax2.c, Line 470 (iax_error_output):
information element length exceeds message size

WARNING[1142106560]: File chan_iax2.c, Line 4191 (socket_read):
undecodable frame received

Both error messages are showing up on both servers.

Thanks again,

Brent

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Brian West
Sent: Thursday, December 25, 2003 2:02 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] IAX NOTICE and WARNING messages

Use IAX2 :)

bkw

On Thu, 25 Dec 2003, Brent Franks wrote:

> Hello,
>
> Hope everyone is enjoying their holiday!
>
> We setup two asterisk servers (From CVS on Wednesday) and set up IAX
> between the two. Right now they both reside on a switch with a static
> 192.168.0.x IP address.  The first Server is .5 and the second is .30.
> Our dialplan seems to be working, however on the console we get a
flurry
> of NOTICE and WARNING messages.
>
> NOTICE[1116941120]: File chan_iax.c, Line 2878 (register_verify) empty
> registration from 192.168.0.30
> NOTICE[1116941120]: File chan_iax.c, Line 2878 (register_verify) empty
> registration from 192.168.0.30
> WARNING[1142106560]: File chan_iax2.c, Line 470 (iax_error_output):
> Information element length exceeds message size
> WARNING[1142106560]: File chan_iax2.c, Line 4191 (socket_read):
> undecodable frame received
>
> I receive the same exact error messages on the second server, but with
> the .5 IP Address in the NOTICE Messages.  I have looked through the
.c
> files to see if I can figure out what is happening, but can't come up
> with anything.  Are these types of messages normal? Additionally, In
the
> iax.conf files, I have set both servers to use A and U law codecs.
>
> I have attached parts of my config below.  Any help would be greatly
> appreciated!
>
> Best Regards,
> Brent Franks
>
------------------------------------------------------------------------
> ---------
> The servers have the same exact config, however the registrations are
> obviously different.
> Server 1 Has this:
>
> register => hunasterisk:1111 at 192.168.0.30:5036
>
> [holasterisk]
> type=friend
> auth=md5
> username=holasterisk
> secret=2222
> context=local
> host=dynamic
> defaultip=192.168.0.30
> qualify=yes
> ;trunk=yes
>
> While Server 2 has:
>
> register => holasterisk:2222 at 192.168.0.5:5036
>
> [hunasterisk]
> type=friend
> auth=md5
> username=hunasterisk
> secret=1111
> context=local
> host=dynamic
> defaultip=192.168.0.5
> qualify=yes
> ;trunk=yes
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users




More information about the asterisk-users mailing list