[Asterisk-Users] unsubscribe

[Francisco Perez-Landaeta]

unsubscribe
----- Original Message ----- 
From: "jerk face" <jerkface2098 at yahoo.com>
To: <asterisk-users at lists.digium.com>
Sent: Tuesday, August 26, 2003 9:57 AM
Subject: Re: [Asterisk-Users] RE: T100P/ TSU 600 installation problem


> Oops ... I found out my problem
> span=....
> 
> --- jerk face <jerkface2098 at yahoo.com> wrote:
> > I am using a crossover cable.
> > My channel definitions are:
> > fxoks=1-22
> > fxsks=23-24
> > in zaptel.conf
> > 
> > 
> > --- Alex Lopez <alex at opsys.com> wrote:
> > > 
> > > What cable are you using, The SU600 to Digium
> > cards
> > > need a crossover
> > > cable.
> > > 
> > > 1 to 4
> > > 2 to 5
> > > 4 to 1
> > > 5 to 2
> > > 
> > > That would stop it from not working,
> > > 
> > > also make sure that you have a span definition on
> > > the zaptel.con file.
> > > 
> > > 
> > > 
> > > Message: 7
> > > Date: Mon, 25 Aug 2003 12:52:12 -0700 (PDT)
> > > From: jerk face <jerkface2098 at yahoo.com>
> > > Subject: RE: [Asterisk-Users] T100P/ TSU 600
> > > installation problem
> > > To: asterisk-users at lists.digium.com
> > > Reply-To: asterisk-users at lists.digium.com
> > > 
> > > Each port is set to the proper signalling type
> > (FXO,
> > > FXS).  I can't find any other options for the
> > > individual ports.
> > > As for the timing and configuration of NI, I have
> > > tried 
> > > NI:
> > > Timing Mode as both DTE and NI (my only choices)
> > > 
> > > Where else should I be checking?
> > > (Before this morning, I hadn't even seen a channel
> > > bank before, so I'm a little lost at the moment).
> > > 
> > > Thanks for your time.
> > > 
> > > --- Wade Weppler <weppler at wwworks-inc.com> wrote:
> > > > Have you configured the TSU600 properly?  You
> > have
> > > > to allocate each FXO/FXS
> > > > channel to a timeslot before it will work.  This
> > > is
> > > > not automatically done
> > > > (like the Adtran Total Access series).
> > > > 
> > > > Mind you, you should still have a sync light on
> > > the
> > > > T1 card...
> > > > 
> > > > -wade
> > > > 
> > > > > -----Original Message-----
> > > > > From: asterisk-users-admin at lists.digium.com
> > > > [mailto:asterisk-users-
> > > > > admin at lists.digium.com] On Behalf Of jerk face
> > > > > Sent: Monday, August 25, 2003 3:01 PM
> > > > > To: asterisk-users at lists.digium.com
> > > > > Subject: RE: [Asterisk-Users] T100P/ TSU 600
> > > > installation problem
> > > > > 
> > > > > My zapata.conf is located in /etc/asterisk and
> > > my
> > > > > zaptel.conf is located in the /etc directory.
> > > > > 
> > > > > --- "Adams, Gavin" <gadams at promisant.com>
> > wrote:
> > > > > > > -----Original Message-----
> > > > > > > From: jerk face
> > > > [mailto:jerkface2098 at yahoo.com]
> > > > > >
> > > > > >
> > > > > > > I seem to be having a problem with the
> > T100P
> > > > card.
> > > > > >  So
> > > > > > > far I have done the following:
> > > > > > >
> > > > > > > vi zaptel.conf
> > > > > > > fxoks=1-22
> > > > > > > fxsks=23-24
> > > > > > > ...
> > > > > > >
> > > > > > > vi zapata.conf
> > > > > > > ...
> > > > > > > signalling=fxo_ks
> > > > > > > ...
> > > > > > > channel => 1-22
> > > > > > > ...
> > > > > > > signalling=fxs_ks
> > > > > > > ...
> > > > > > > channel => 23-24
> > > > > > >
> > > > > > > I then run
> > > > > > > modprobe zaptel
> > > > > > > modprobe wct1xxp
> > > > > > > ztcfg -vv
> > > > > > >
> > > > > > > There are no errors to report.  In
> > > > /proc/zaptel/1
> > > > > > all
> > > > > > > of the configured channels are listed.
> > > > > >
> > > > > > Crazy question, is zaptel.conf is /etc or
> > > > > > /etc/asterisk? If the latter,
> > > > > > try:
> > > > > >
> > > > > > ztcfg -c /etc/asterisk/zaptel.conf -vvv
> > > > > >
> > > > > > --- Gavin
> > > > > >
> > > > > >
> > > _______________________________________________
> > > > > > Asterisk-Users mailing list
> > > > > > Asterisk-Users at lists.digium.com
> > > > > >
> > > > >
> > > >
> > >
> >
> http://lists.digium.com/mailman/listinfo/asterisk-users
> > 
> > 
> > __________________________________
> > Do you Yahoo!?
> > Yahoo! SiteBuilder - Free, easy-to-use web site
> > design software
> > http://sitebuilder.yahoo.com
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> >
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
> http://sitebuilder.yahoo.com
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>