[Asterisk-Users] Chan_h323 and a Cisco Gateway

[Brian West]

Well depends.. what kind of problem are you having?

http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a0080093f62.shtml

http://www.cisco.com/en/US/tech/tk652/tk701/technologies_problem_troubleshooting09186a00800c5e33.shtml

Check those... I suspect one of those has nailed ya.

If you have PRI and you try to terminate outbound via chan_h323 you must
have "bearer-cap speech" on your voice-ports.  Because chan_h323 isn't
sending the appropriate bearer cap in the H.225 SETUP message.

Hours of beating head on desk and searching... Hope this helps.

Thanks,
Brian


On Tue, 26 Aug 2003, Steven Thomas wrote:

>
>
>
>
> Hi,
>
> Can anyone tell me what should be included in h323.conf to get asterisk to
> talk to a Cisco 2600 gateway?  Any statement examples for extensions.conf
> would also be appreciated.  Thanks.
>
> Will chan_h323 use the Cisco as a gateway anyway?
>
>
> Regards,
>
> Steven Thomas
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>