[Asterisk-Users] Question on setting up MeetMe conference bridge

[John Fortman]

I was able to connect two H323 clients in a conference call with only one X100P card.  ztdummy did not compile correctly so I'm only using zaptel.o and wsfxo.o.  The conferencing worked without any special setup on my part so I can't say that it's anything that I've done.
  ----- Original Message ----- 
  From: Lee Goodman 
  To: asterisk-users at lists.digium.com 
  Sent: Thursday, August 21, 2003 10:06 AM
  Subject: [Asterisk-Users] Question on setting up MeetMe conference bridge


  So I setup the MeetMe application in Asterisk
  Assigned an extension to it.

  When one of my SIP phone dials the conference extension, they get a message "you are the first one in the conference", so far so good.
  When the 2nd SIP phone dials the conference extension, they get a busy signal

  Now I know that you have to have a Zapta device to enable conference application. I have an X100P (1 port FXO card). So, do you have to have mulitple Zapata devices to enable multiple users in a conference?
  Do I have to enable the zdummy (dummy zapata code) to run a multiuser conference? 


  Thanks

  Lee Goodman

  PS, if someone could send an example configuration, that would be great

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030822/a71d44cb/attachment.htm