[Asterisk-Users] trying to make a X100P work

[John Brown]

PSTN line is plugged in to the unit, I'll confirm the
right interface jack



On Tue, Aug 19, 2003 at 05:01:19PM -0500, Steven Critchfield wrote:
> On Tue, 2003-08-19 at 16:55, John Brown wrote:
> > I guess my question is "how do I make sure asterisk knows about it"
> > 
> > i'm thick headed today.
> > 
> > and    /proc/zaptel/1  shows a RED Alarm
> 
> Then you need to plug a PSTN connection into the unit to clear the
> alarm.
> 
> As for letting asterisk know about it, /etc/asterisk/zapata.conf
> 
> > On Tue, Aug 19, 2003 at 04:31:10PM -0500, Steven Critchfield wrote:
> > > On Tue, 2003-08-19 at 16:12, John Brown wrote:
> > > > Hi List, 
> > > > 
> > > > 	Could some kind soul post me a quick config
> > > > that makes use of a Wildcat X100P
> > > > 
> > > > when I do a show channels nothing is there
> > > > 
> > > > lsmod shows the wcfxo and related drivers loaded
> > > > and with no errors
> > > > 
> > > > zap show channels  is blank as well
> > > 
> > > show channels is for channels that are in use. First look and see if
> > > there is a /proc/zap directory with your wildcard listed in there. If so
> > > then you just need to make sure that asterisk knows about it. Then call
> > > it from an outside line and watch as it picks up the line.
> > > -- 
> > > Steven Critchfield  <critch at basesys.com>
> > > 
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> -- 
> Steven Critchfield  <critch at basesys.com>
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users