[Asterisk-Users] trying to make a X100P work

[Steven Critchfield]

On Tue, 2003-08-19 at 16:55, John Brown wrote:
> I guess my question is "how do I make sure asterisk knows about it"
> 
> i'm thick headed today.
> 
> and    /proc/zaptel/1  shows a RED Alarm

Then you need to plug a PSTN connection into the unit to clear the
alarm.

As for letting asterisk know about it, /etc/asterisk/zapata.conf

> On Tue, Aug 19, 2003 at 04:31:10PM -0500, Steven Critchfield wrote:
> > On Tue, 2003-08-19 at 16:12, John Brown wrote:
> > > Hi List, 
> > > 
> > > 	Could some kind soul post me a quick config
> > > that makes use of a Wildcat X100P
> > > 
> > > when I do a show channels nothing is there
> > > 
> > > lsmod shows the wcfxo and related drivers loaded
> > > and with no errors
> > > 
> > > zap show channels  is blank as well
> > 
> > show channels is for channels that are in use. First look and see if
> > there is a /proc/zap directory with your wildcard listed in there. If so
> > then you just need to make sure that asterisk knows about it. Then call
> > it from an outside line and watch as it picks up the line.
> > -- 
> > Steven Critchfield  <critch at basesys.com>
> > 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Steven Critchfield  <critch at basesys.com>