[Asterisk-Users] FXO mode

[Steve Meyers]

On Wed, 2003-08-13 at 09:46, Dave Cotton wrote:
> I've had a few problems with my system holding the line after a call has
> been made, just now I rebooted and noticed the following in
> /var/log/messages

When you say "holding the line", do you mean that asterisk still
believes a channel is in use even after you hang up?  If so, I've seen
the same thing happen several times with the X100P.  If I do "show
channels" it will show one of my SIP phones connected to one of the
outside lines, but if I check that SIP phone, it is not in use, and
there is no way to re-activate the channel from the SIP phone.

Running "soft hangup <zap channel>" will hangup the channel (you don't
need to reboot).

I'm not entirely sure what causes it.  So far, I've only seen it happen
from 2 of our 9 SIP phones, but they're the ones most often on the
phone.  It always involves an outside line, so I believe the X100P is
the problem, but I can't be sure.

What other information can I gather to pinpoint the problem?