[Asterisk-Users] help please with single t1 configuration

[Barry Porch]

Yes, I run ztcfg -vvv and it tells me that there are 0 channels.

-----Original Message-----
From: Brian West [mailto:brian at bkw.org] 
Sent: Saturday, August 09, 2003 6:07 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] help please with single t1 configuration

did you happen to run ztcfg after you setup the configs?

On Sat, 9 Aug 2003, Barry Porch wrote:

> I am attempting to set up an Asterisk box which I am only concerned
with
> getting a single T1 working.  I have this T1 connected to my PBX and I
> am looking at using Asterisk as a conference bridge.
>
> Here is my zaptel.conf:
>
> span=1,1,0,d4,ami
> e&m=1-24
> loadzone=us
> defaultzone=us
>
> Here is my Zapata.conf:
>
> [channels]
> language=en
> context=default
> signalling=em_w
> group=1
> channel=1-24
>
> As you can see I am trying to set this up as a D4/AMI E&M T1.  I also
> have "modprobe zaptel" and "modprobe wct1xxp" in my rc.local.
>
> When I try to run Asterisk it complains that it cannot access channel
1
> and dies.
>
> I can run zttool which "sees" the T100 card that I have installed.
> However, when I run "ztcfg -vvvv" it sells me that 0 channels are
> configured.
>
> What am I missing here?
>
> Thanks!
>
> Barry
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users