[Asterisk-Users] X-Lite - No sound + chan_sip issue

[WipeOut .]

Make sure you are using G.711a, G.711u or GSM codecs.. I have not been able to get iLBC to work and someone the other days couuld not get SPX working..

You will need to enable/disable the codecs in X-Lite..

If you also want to control the codecs that * uses then put the following in the general section of your sip.conf

disallow=all
allow=alaw
allow=ulaw
allow=gsm

Hope that helps..

> Hi,
> 
> X-Lite logs into * with no problems. I dial "1000" and * plays greeting, but
> i can not hear it.
> Tried many times with the same result.
> 
> After quite few tries * complains about:
> -------------------------------------------------
> WARNING[81926]: File chan_sip.c, Line 388 (retrans_pkt): Maximum retries
> exceeded on call FBD1EC34-9FD3-4855-9DC1-97933EE0F5F3 at 192.168.1.104 for
> seqno 43 (Response)
> WARNING[81926]: File chan_sip.c, Line 2002 (__transmit_response): Unable to
> determine sequence number from ''
> -------------------------------------------------
> 
> 
> 
> Has anyone had the same problem?
> 
> Senad
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users

-- 
______________________________________________
http://www.linuxmail.org/
Now with e-mail forwarding for only US$5.95/yr

Powered by Outblaze