[Asterisk-Users] Using OH323 and Gatekeeper

[Jeremy McNamara]

You shouldn't run the gatekeeper and asterisk on the same machine.

Jeremy McNamara


Langley, Sean wrote:

>Hello all,
>
>Please forgive me if this sounds a little (or a lot) ignorant as I am very
>new to asterisk.
>
>Right now I have two pc's connected back to back through an E100 card
>running asterisk.  I have openh323 running as well and I am able to route
>calls through the E1 line.  Next up I would like to be able to register
>asterisk with a gatekeeper.  On another computer is running openGK.  Using
>the gatekeeper I am able to register my h323 client with a phone number, it
>all seems to be working.
>
>When I put the ip address of the gatekeeper into h323.conf, asterisk failed
>to load.  I get an error that I can't open an h323 listener on port 1720.
>
>Has anyone done this before?  Your help would be appreciated.
>
>Regards,
>
>Sean Langley, P.Eng
>Firmware Engineer
>General Dynamics Canada
>(403)730-1482
>sean.langley at gdcanada.com
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>  
>