[Asterisk-Users] Seting up TDM40B

[McAughan, Matt]

Not sure about that one still an asterisk newbie myself but had similar
problems. The only other thing I can suggest and as stupid as this might
sound... is the card seated properly on the motherboard?

-----Original Message-----
From: Eduardo Goncalves [mailto:eduardo at acenet.com.br]
Sent: Friday, August 01, 2003 03:46
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Seting up TDM40B


On Fri, 1 Aug 2003 15:25:49 -0500
"McAughan, Matt" <MMcAughan at synhrgy.com> wrote:

> Have you setup the zaptel.conf and zapata.conf configuration files for
>how
> ever many ports you have on the card and then run the ztcfg -vvvc
>command?
> 
	
	Since the module aren't loaded, config zaptel.conf, zapata.conf and
run ztcfg will not work, right?

my conf files:
===========
zaptel.conf
===========
fxsls=1-4
loadzone = us
defaultzone=us


===========
zapata.conf
===========
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
echocancel=yes
echocancelwhenbridged=no
rxgain=0.0
txgain=0.0
group=1
immediate=no
context=pstn
signalling=fxs_ks
channel=1-4


thanks
[]'s
Eduardo


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030801/f8fdb27b/attachment.htm