[Asterisk-Users] still problems with oh323

[Paulo H. Mannheimer]

Bingo!

Thanks for the help.

> Yo Paulo,
> 
> You should try NuFone Network's chan_h323, which is now included in
> the Asterisk-distribution.  It doesn't install by default, so you should
> `make clean; make install; make samples' from "channels/h323/" to
> install it, together with it's initial config-file.  Don't forget to rm
> the
> "chan_oh323.so" from Asterisk's modules-dir afterwards.
> 
> Apart from some minor quirks, it works pretty well with Netmeeting here.
> As with chan_oh323, you should make sure that it's configured for
> inband DTMF.  Good luck!
> 
> 
> 
>     Grtz,
> 
>       Oliver
> 
> On Sat, Apr 26, 2003 at 02:53:25 -0300, Paulo H. Mannheimer wrote:
> 
> > Hi,
> > 
> > I'm still struggling to make netmeeting work with asterisk and oh323.
> I'm 
> > dialing from netmeeting into a regular phone, connected to my TDM10B. 
> > everything looks great, except that I cannot hear my voice at the FXS
> side, 
> > just static that increases when I speak on netmeeting's mike.
> Nevertheless, if 
> > I speak on the telephone I do can hear my voice on my headsets.
> > 
> > I configured netmeeting for CCITT u-Law, 8 Khz, 8 bit mono. On
> asterisk's 
> > side, this is what I get on the console
> > 
> > *CLI> oh323 show info
> > 
> > Information about active OpenH323 channel(s)
> > --------------------------------------------
> > 0 : token=ip$192.168.0.101:3678/24464, state=ESTABLISHED, from_remote=1,
> 
> > RX/TX=8/160, format=G.711U ,
> > 
> > Any hint?
> > 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>