[Asterisk-Users] Call Queue Manager and DID Digits

[asterisk at billheckel.com]

DID or DNIS digits work quite well, basically they look to the PBX as dial extensions after the call 
is picked up ( skipping the 's' context ).  Here is a small example from my system ( we have ~20 
DNIS pairs assigned )

This may make it a bit clearer:

Bill

--- zapata.conf snippett
; this is T1 number 4 on the tormenta card
context= extlocal
switchtype=national
group=4
signalling=pri_cpe
channel = 73-95
; remember 96 is a D channel


---  extensions.conf snippett
; local is 73-95 and port 4 on T1 card
[extlocal]
include => cmextlocal
include => pmextlocal
include => bcextlocal

[pmextlocal]

exten => 1529,1,Goto,peoplesmain|s|1
exten => 1509,1,Goto,peoplesmain|s|1
exten => 0240,1,Goto,peoplesmain|s|1
exten => 0241,1,Goto,peoplesmain|s|1
exten => 1577,1,Goto,peoplesmain|s|1
exten => 1598,1,Goto,peoplesfax|s|1




Jayson Vantuyl wrote:
> I've been asked to create a graphical "call-queue"
> manager.  That is, use the existing call queues application but allow
> a way to view what's coming and attach information to it.  As far as the
> "attaching information" that's in the realm of my application, but I'm
> trying to figure out if the internals of queues are exposed through any
> interface.  Any help there?
> 
> Also, I have a need to accept DID digits.  That is, when a call comes in
> on the trunk, the phone company dials a few digits before connecting the
> call (presumably allowing special handling based on the incoming
> extension).  Does anyone have something like this working?  Is it
> possible to have some lines go to the auto-attendent and some ring
> through?
> 
> I was thinking it would be possible with something as simple as
> (assuming 4-digit DID)
> 
> [default]
> ; 555-1212 is the main number
> exten => 1212,1,Goto(AutoAttendant,s,1)
> ; 555-5000 is the backdoor to the voicemail system
> exten => 5000,1,VoiceMailMain()
> exten => 5000,1,Hangup()
> ; 555-1800 is Bob's phone
> exten => 1800,1,Dial(Zap/842)
> 
> ...
> 
> Is that in line or am I missing something?  Does anyone have that
> working?  The service is expensive, so I'd rather not have to pay to
> find out if I can do it.  ;)
> 
> Thanks in advance,
> 
> Jayson
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>