R: [Asterisk-Users] Zhone re-provision

[Matteo Brancaleoni]

The best way I found to restore a configuration
for the zhone, is to upload it via the serial
port. I've done that either with minicom and
with hyperterminal. But pay attention to
the ascii timings as specified in the zhone
manual, since is ascii transfer is too fast
the zhone will not collect some commands.
You can set them in minicom (or HT ) a bit
longer than the ones specified in the manual,
to be 100% sure .

Matteo

> -----Messaggio originale-----
> Da: asterisk-users-admin at lists.digium.com 
> [mailto:asterisk-users-admin at lists.digium.com] Per conto di 
> Eris Riswanto
> Inviato: martedì 22 aprile 2003 9.14
> A: asterisk-users at lists.digium.com
> Oggetto: RE: [Asterisk-Users] Zhone re-provision
> 
> 
> On Mon, 21 Apr 2003, Wade Weppler wrote:
> 
> |Yes you can, and you can backup the configuration to a TFTP 
> server as 
> |well.
> |
> |Check out the "Saving and restoring configurations" in the 
> Diagnostics 
> |section of the User's Guide:
> |
> |http://www.zhone.com/support/technical_support/zplex/product_
> documents/
> |ug_00
> |11_10b.pdf
> |
> 
> I've been setup tftp server with tftp program from 
> jbmelectronics. then i try to restore zhone configuration 
> with file you sent and also i've tried to dump the 
> configuration file but the processes never completed because 
> of timeout. Do i miss something in setup of tftp server? What 
> is tftp program that can work fine with this zhone?
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com 
> http://lists.digium.com/mailman/listinfo/aster> isk-users
>