[Asterisk-Users] Zhone re-provision

[Brancaleoni Matteo]

when restored to factory defaults all interfaces
on the zhone are down and not configured ... so can't be
used. You must enable the T1, the 24 ports, and
create the bridge between the analog port and
the correspondent T1 channel.

Matteo

Il lun, 2003-04-21 alle 17:35, Eris Riswanto ha scritto:
> On Mon, 21 Apr 2003, Wade Weppler wrote:
> |
> |I've attached our configuration file for our 8FXO/16FXS Zplex.  Hopefully it
> |will help.  You'll need to change the IP, of course.
> |
> |-wade
> |>
> |> I have just make zhone set2default to factory default setting.
> |> What do i have to do to make T1 interface zhone match with T100P.
> |
> 
> Do i have to set all of these config, what i mean is it necessary
> since what i need is just to configure T1 line so it can communicate with
> T100P card and leave the others to config to zhone factory default.
> I read from zhone manual that the default value of configuration
> system is generally match with T100P configuration in zaptel.conf.
> Do i just need only to bring T1 interface zhone up?
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users