[Asterisk-Users] netmeeting dial

Paulo H. Mannheimer paulohm at instant.com.br
Mon Apr 21 10:39:21 MST 2003


I don't wannna do that.

I want to dial FROM an H323 channel into a Zap channel.

In other words, I have a call comming from an H323 channel and I want to 
reroute it to the Zap channel

> The 's' extension is the starting point for a call, so for example if you had
> an FXS channel with a phone connected to it and you wanted all incomming
> calls to ring through to that phone you would use..
> 
> exten => s,1,Dial(Zap/x)
> 
> Where x is the channel number.. for an H.323 phone I would guess it would
> look like this..
> 
> exten => s,1,Dial(H323/y)
> 
> Where Y is the name you gave the phone config in the .conf file..
> 
> 
> 
> > Many thanks. Now I get ...
> > 
> > *CLI> WARNING[18450]: File pbx.c, Line 1680 (ast_pbx_run): 
> > Channel 'H323:17672' sent into invalid extension 's' in context 'default',
> but 
> > no invalid handler
> > 
> > I'vr added your lines to my default context. I understand that I need to
> have 
> > a line with an 's', but I just don't know which one to use. I've tried
> using 
> > s,1,Wait(1) but it didn't work
> > 
> > Best
> > 
> > 
> > > You are not passing the number to the Dial program..
> > > 
> > > Try this..
> > > 
> > > ignorepat => 9
> > > exten => _9.,1,Dial(Zap/1/${EXTEN:1})
> > > exten => _9.,2,Congestion
> > > 
> > > What this does... the 'ignorepat' will maintain a dialtone on the line
> when a
> > > number is dialed.. The first 'exten' says that any number dialed
> beginning
> > > with a 9 will be sent to channel 'Zap/1' and the number that will be
> passed
> > > to it is the one that was dialed without the first digit (being the 9)..
> The
> > > last line says that if the channel is busy you get a busy tone..
> > > 
> > > Hope that helps..
> > > 
> > > > HI, I'm using netmeeting to connect to an asterisk server and dial
> out.
> > > > 
> > > > my extension looks like this
> > > > 
> > > > exten => s,1,Dial,Zap/1/
> > > > 
> > > > Unfortunatelly the number that I have dialed in Netmeeting is lost ;-(
> 
> > > > 
> > > > If I hardcode the number on the line above, like ...
> > > > 
> > > > exten => s,1,Dial,Zap/1/6642794
> > > > 
> > > > ... everything works fine
> > > > 
> > > > What am I missing?
> > > > 
> > > > 
> > > > _______________________________________________
> > > > Asterisk-Users mailing list
> > > > Asterisk-Users at lists.digium.com
> > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > 
> > > -- 
> > > ______________________________________________
> > > http://www.linuxmail.org/
> > > Now with e-mail forwarding for only US$5.95/yr
> > > 
> > > Powered by Outblaze
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > 
> > 
> > 
> > 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> -- 
> ______________________________________________
> http://www.linuxmail.org/
> Now with e-mail forwarding for only US$5.95/yr
> 
> Powered by Outblaze
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 






More information about the asterisk-users mailing list