[Asterisk-Users] Zhone re-provision

[Wade Weppler]

No, you'll also need to configure all of the FXO and FXS ports to grab the
proper timeslice from the T1.  The Zhone's are a pain.  They don't
automatically configure the FXS/FXO ports.

-wade

> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com [mailto:asterisk-users-
> admin at lists.digium.com] On Behalf Of Eris Riswanto
> Sent: Monday, April 21, 2003 11:36 AM
> To: asterisk-users at lists.digium.com
> Subject: RE: [Asterisk-Users] Zhone re-provision
> 
> On Mon, 21 Apr 2003, Wade Weppler wrote:
> |
> |I've attached our configuration file for our 8FXO/16FXS Zplex.  Hopefully
> it
> |will help.  You'll need to change the IP, of course.
> |
> |-wade
> |>
> |> I have just make zhone set2default to factory default setting.
> |> What do i have to do to make T1 interface zhone match with T100P.
> |
> 
> Do i have to set all of these config, what i mean is it necessary
> since what i need is just to configure T1 line so it can communicate with
> T100P card and leave the others to config to zhone factory default.
> I read from zhone manual that the default value of configuration
> system is generally match with T100P configuration in zaptel.conf.
> Do i just need only to bring T1 interface zhone up?
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users