[Asterisk-Users] No audio in Linejack

[Lubomir Christov]

play with
txgain=80%
rxgain=0.8

or just tray another voice fie ( some_file.gsm) :)

maybe it will help :)

Lubo

isamar at isamarmaia.org wrote:
> Hi folks!
> 
> I started to play with Asterisk today and
> after giving a look and some tries and froze
> completely try to play an audio file to the incoming call
> in the FXO port.
> 
> 
> *CLI> Unit is ringing
>   == Accepting call on 'Phone/phone0'
>     -- Executing Wait("Phone/phone0", "1") in new stack
> Unit is ringing
>     -- Executing Answer("Phone/phone0", "") in new stack
>     -- Executing DigitTimeout("Phone/phone0", "5") in new stack
>     -- Set Digit Timeout to 5
>     -- Executing ResponseTimeout("Phone/phone0", "10") in new stack
>     -- Set Response Timeout to 10
>     -- Executing Playback("Phone/phone0", "test") in new stack
>     -- Playing 'test'
> 
> 
> My test.wav file format is:
> test.wav: RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit,
> mono 8000 Hz
> 
> 
> My phone.conf settings are defined:
> 
> mode=fxo
> format=slinear
> context=demo
> txgain=80%
> rxgain=0.8
> device => /dev/phone0
> 
> 
> What am I missing?
> 
> Isamar
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>