[Asterisk-Users] Configuring for outbound calls with PRI on T100P

[Kalin Dikov]

>I run a SIP-only shop with a 23 channel PRI and single T100P.
>Here are my configs:
>
>/etc/zaptel.conf:
>span=1,0,0,esf,b8zs
>bchan=1-23
>dchan=24
>loadzone = us
>defaultzone=us
>
>
>/etc/asterisk/zapata.conf
>[channels]
>context=default
>switchtype=dms100
>signalling=pri_cpe
>pridialplan=unknown
>rxwink=300              ; Atlas seems to use long (250ms) winks
>usecallerid=no
>hidecallerid=no
>callwaiting=no
>callwaitingcallerid=yes
>threewaycalling=yes
>transfer=no
>cancallforward=yes
>callreturn=yes
>echocancel=128
>echocancelwhenbridged=yes
>rxgain=0.0
>txgain=0.0
>group=1
>immediate=no
>musiconhold=default
>channel => 1-23
>
> -----Original Message-----
>From: 	Ken McKittrick [mailto:klmac at usadatanet.net]
>Sent:	Wednesday, April 09, 2003 3:21 PM
>To:	asterisk-users at lists.digium.com
>Subject:	[Asterisk-Users] Configuring for outbound calls with PRI on
T100P
>
>Hello
>
>I've got Asterisk running and accepting inbound calls. When I try to
>place an outbound call from a Cisco 7960 SIP phone, I get an immediate
>Fast Busy.
>
>Does anyone have examples configurations for this?
>
>Here's what I have in zapata.conf, extensions.conf is pretty much what
>came with the samples.
>
>switchtype = national
>signalling = pri_cpe
>group = 1
>channel => 1-16
>;
>context = local
>swtichtype = national
>signalling = pri_cpe
>group = 2
>channel = 17-23
>
>Ken McKittrick
>
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users

------------------
Kalin Dikov
technical manager
IPPN Networks LTD
http://ippn.net
------------------