[Asterisk-Users] Configuring for outbound calls with PRI on T100P

[Steven Critchfield]

Is the Fast busy from the Cisco or from Asterisk? Makes a big
difference. The Cisco can receive calls with out having been fully
authenticated to asterisk, but asterisk will not allow an
unauthenticated user to make a call out. In this case the Cisco would be
issueing the fast busy and asterisk is going I told you not to talk to
me till you authenticate.


On Wed, 2003-04-09 at 15:37, Ken McKittrick wrote:
> Dustin
> 
> Well, that's not it, must be something in the dialplan in 
> extensions.conf.
> 
> Thanks
> Ken
> 
> On Wednesday, April 9, 2003, at 03:56 PM, DUSTIN WILDES wrote:
> 
> > I run a SIP-only shop with a 23 channel PRI and single T100P.
> > Here are my configs:
> >
> > /etc/zaptel.conf:
> > span=1,0,0,esf,b8zs
> > bchan=1-23
> > dchan=24
> > loadzone = us
> > defaultzone=us
> >
> >
> > /etc/asterisk/zapata.conf
> > [channels]
> > context=default
> > switchtype=dms100
> > signalling=pri_cpe
> > pridialplan=unknown
> > rxwink=300              ; Atlas seems to use long (250ms) winks
> > usecallerid=no
> > hidecallerid=no
> > callwaiting=no
> > callwaitingcallerid=yes
> > threewaycalling=yes
> > transfer=no
> > cancallforward=yes
> > callreturn=yes
> > echocancel=128
> > echocancelwhenbridged=yes
> > rxgain=0.0
> > txgain=0.0
> > group=1
> > immediate=no
> > musiconhold=default
> > channel => 1-23
> >
> >  -----Original Message-----
> > From: 	Ken McKittrick [mailto:klmac at usadatanet.net]
> > Sent:	Wednesday, April 09, 2003 3:21 PM
> > To:	asterisk-users at lists.digium.com
> > Subject:	[Asterisk-Users] Configuring for outbound calls with PRI on 
> > T100P
> >
> > Hello
> >
> > I've got Asterisk running and accepting inbound calls. When I try to
> > place an outbound call from a Cisco 7960 SIP phone, I get an immediate
> > Fast Busy.
> >
> > Does anyone have examples configurations for this?
> >
> > Here's what I have in zapata.conf, extensions.conf is pretty much what
> > came with the samples.
> >
> > switchtype = national
> > signalling = pri_cpe
> > group = 1
> > channel => 1-16
> > ;
> > context = local
> > swtichtype = national
> > signalling = pri_cpe
> > group = 2
> > channel = 17-23
> >
> > Ken McKittrick
> >
> >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Steven Critchfield  <critch at basesys.com>