[Asterisk-Users] T100P Incoming Calls Drop

[Matthew Farley]

Many thanks for the suggestions so far... Unfortunately, setting
callprogress=no and busydetect=no (and entirely rebooting the system)
has had no effect on the call-dropping problem.

While talking to the Central Office guys, they inquired as to precisely
what sort of trunk group it is that they should be providing to my
asterisk machine... They mentioned a 'PBX' type of trunk group (which
sounds most likely and is how it is configured now in the CO). Also,
they mentioned the possibility of changing it to a '2-way' trunk group.
They can also provision 'incoming-only' and 'outgoing only' for me, but
these really don't sound like what I'm looking for. They also mentioned
that they were getting a 'stuck MF sender' when a call comes in through
my T-1 (from the PSTN), which evidently means that in some way my
asterisk machine is not responding properly to the incoming call (and
the CO may be dropping the call since it was never entirely set up). In
case it matters, the CO itself is a Siemens DCO.

Does anyone have a similar setup (that works), and happen to know how
the channelized T-1 is provisioned from the CO? If so, such information
might be very helpful. Thanks again for all your valuable support.

Thanks,
-Matthew Farley



On Tue, 2003-04-08 at 14:05, Wade Weppler wrote:
> You might want to turn off callprogress as well (callprogress=no) as it was
> hanging up on me as well.
> 
> -wade
> 
> > -----Original Message-----
> > From: asterisk-users-admin at lists.digium.com [mailto:asterisk-users-
> > admin at lists.digium.com] On Behalf Of Matthew Farley
> > Sent: Tuesday, April 08, 2003 2:30 PM
> > To: asterisk-users at lists.digium.com
> > Subject: Re: [Asterisk-Users] T100P Incoming Calls Drop
> > 
> > Unfortunately, setting busydetect=no had no effect on the issue. I
> > changed this in the config file and issued a reload command to the
> > asterisk console (I assume that this would be sufficient to implement
> > the change).
> > 
> > Any other suggestions would be most welcome...
> > 
> > Thanks!
> > -Matthew Farley
> > 
> > On Tue, 2003-04-08 at 12:48, Martin Pycko wrote:
> > > add this to zapata.conf
> > >
> > > busydetect=no
> > >
> > > regards
> > > Martin
> > > On 8 Apr 2003, Matthew Farley wrote: