[Asterisk-Users] T100P Incoming Calls Drop

[Wade Weppler]

You might want to turn off callprogress as well (callprogress=no) as it was
hanging up on me as well.

-wade

> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com [mailto:asterisk-users-
> admin at lists.digium.com] On Behalf Of Matthew Farley
> Sent: Tuesday, April 08, 2003 2:30 PM
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] T100P Incoming Calls Drop
> 
> Unfortunately, setting busydetect=no had no effect on the issue. I
> changed this in the config file and issued a reload command to the
> asterisk console (I assume that this would be sufficient to implement
> the change).
> 
> Any other suggestions would be most welcome...
> 
> Thanks!
> -Matthew Farley
> 
> On Tue, 2003-04-08 at 12:48, Martin Pycko wrote:
> > add this to zapata.conf
> >
> > busydetect=no
> >
> > regards
> > Martin
> > On 8 Apr 2003, Matthew Farley wrote:
> >
> > > I have been experiencing a rather odd issue with my (newly connected)
> > > T100P card. It is installed in my Asterisk server, which is working
> > > great with SIP clients. The card is connected to a channelized T-1
> line
> > > (24 channels). The odd bit is that outgoing calls (Asterisk --> T-1 --
> >
> > > PSTN) works just fine. However, incoming calls (PSTN --> T-1 -->
> > > Asterisk) are dropped after about 20 seconds (the call is fine until
> it
> > > drops).
> > >
> > >      This occurs irregardless of how I handle the incoming call within
> > > Asterisk (playback a message, ring an extension, whatever...). In case
> > > it is related, Asterisk does not see (or perhaps does not recognize)
> any
> > > DTMF on these incoming calls. My console looks normal for incoming
> calls
> > > until it says:
> > >
> > > == Spawn extension (longdistance, s, 5) exited non-zero on 'Zap/1-1'
> > >   -- Hungup 'Zap/1-1'
> > >
> > > Calls that come in from SIP clients (same context, same rules in
> > > extensions.conf) do not experience this problem.
> > >
> > > The T-1 is configured as follows:
> > >
> > > zaptel.conf:
> > > span=1,1,0,d4,ami
> > > e&m=1-24
> > > loadzone=us
> > > defaultzone=us
> > >
> > > zapata.conf:
> > > group => 1
> > > signalling => em_w
> > > language => en
> > > context => longdistance
> > > channel => 1-24
> > > echocancel => yes
> > > rxgain=0.0
> > > txgain=0.0
> > > callerid=asreceived
> > > amaflags=default
> > > busydetect=yes
> > > musiconhold=random
> > >
> > >
> > > Has anyone else experienced this sort of problem before? Any
> assistance
> > > that anyone could provide would be greatly appreciated.
> > >
> > > Thanks!
> > > -Matthew Farley
> > > --
> > > Matthew Farley <asterisk at wheatstate.net>
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> --
> Matthew Farley <asterisk at wheatstate.net>
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users