[asterisk-ss7] SS7 Config

[Jakub Klausa]

> Devices currently active:
>         wanpipe1 wanpipe2
>  
>  
> Wanpipe Config:
>  
> Device name | Protocol Map | Adapter  | IRQ | Slot/IO | If's | CLK | Baud rate |
> wanpipe1    | N/A          | A101/1D/A102/2D/4/4D/8| 233 | 1       | 1    | N/A | 0         |
> wanpipe2    | N/A          | A101/1D/A102/2D/4/4D/8| 233 | 1       | 1    | N/A | 0         |
>  
> Wanrouter Status:
>  
> Device name | Protocol | Station | Status        |
> wanpipe1    | AFT TE1  | N/A     | Connected     |
> wanpipe2    | AFT TE1  | N/A     | Disconnected  |
>  
> 

Hey,

	assuming the original link is a single span on wanpipe1 and the new one is wanpipe2, you have a problem
with the physical connection probably (or maybe the CRC isn’t set right, or framing). Anyway, the wanrouter config
for wanpipe2 (wanpipe2,conf) may give you some indication what’s wrong there.
 
-- 
Jakub Klausa | +48 509 032 888 | j.klausa at ss7.pl | http://www.ss7.pl/
Dane rejestrowe -> http://kontakt.ss7.pl