[asterisk-ss7] SS7 Config

[Dovid B]

Hi All,

 

I am using a Sangoma card and it has been working fine for a few years. The
carrier is switching switches and we need to set up a new link in parallel.
The carrier says that they see lawyer 1 up but I see it as down. Here is
what I get on my box:

[root at gw2 asterisk]# /etc/init.d/wanrouter status

 

Devices currently active:

        wanpipe1 wanpipe2

 

 

Wanpipe Config:

 

Device name | Protocol Map | Adapter  | IRQ | Slot/IO | If's | CLK | Baud
rate |

wanpipe1    | N/A          | A101/1D/A102/2D/4/4D/8| 233 | 1       | 1    |
N/A | 0         |

wanpipe2    | N/A          | A101/1D/A102/2D/4/4D/8| 233 | 1       | 1    |
N/A | 0         |

 

Wanrouter Status:

 

Device name | Protocol | Station | Status        |

wanpipe1    | AFT TE1  | N/A     | Connected     |

wanpipe2    | AFT TE1  | N/A     | Disconnected  |

 

 

My config  looks like this:

[root at gw2 asterisk]# cat /etc/asterisk/chan_dahdi.conf

;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit

;autogenrated on 2010-12-01

;Dahdi Channels Configurations 

;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak

 

[trunkgroups]

 

[channels]

context=default

usecallerid=yes

hidecallerid=no

callwaiting=yes

usecallingpres=yes

callwaitingcallerid=yes

threewaycalling=yes

transfer=yes

canpark=yes

cancallforward=yes

callreturn=yes

echocancel=no

echocancelwhenbridged=yes

relaxdtmf=yes

rxgain=0.0

txgain=0.0

group=1

callgroup=1

pickupgroup=1

immediate=no

 

;;Sangoma A102 port 1 [slot:1 bus:10 span:1] <wanpipe1>

;switchtype=euroisdn

context=from-pstn

;group=0

;echocancel=yes

;signalling=pri_cpe

;channel =>1-15,17-31

 

;;Sangoma A102 port 2 [slot:1 bus:10 span:2] <wanpipe2>

;switchtype=euroisdn

;context=from-pstn

;group=0

;echocancel=yes

;signalling=pri_cpe

;channel =>32-46,48-62

 

signalling = ss7

ss7type = itu

networkindicator = national

linkset = 1

pointcode = XX07

adjpointcode = XX02

defaultdpc = XX02

cicbeginswith = 1

channel=1-15

cicbeginswith = 17

channel = 17-31

sigchan = 16

group=0

 

ss7_called_nai=national

ss7_calling_nai=national

 

;Adding below for new SS7 link with Verizon

signalling = ss7

ss7type = itu

networkindicator = national

linkset = 2

pointcode = XX07

adjpointcode = XX04

defaultdpc = XX04

cicbeginswith = 1

channel=1-15

cicbeginswith = 1

channel = 17-31

sigchan = 16

group=1

 

 

I am still running on LibSS7 1.X since that is what is working and I can't
break what is working now. Any tips on what I may be doing wrong?

 

Regards,

 

Dovid

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20150615/3b9ef9d6/attachment.html>