[asterisk-ss7] Nature of Address chan_SS7

[Anton VG]

Florian,
it looks like you follow this list not for a long time. chan_ss7 devs
are also subscribed to it. While this question is asterisk ss7
specific, there is a reason to ask here. If someone experienced the
given, he may respond.

2011/9/2  <florian at gruendler.net>:
> Wasim and general audience,
>
>
>
> I felt addressed in your post and I react before I get bashed and a policy
> discussion starts over my statement. I give in to the point that this list
> is probably the only good forum at the moment for Asterisk and SS7 related
> topics and all flavors of software should be welcome. But I stick to the
> point that I suggested Raul to go to “his” development sponsor with the
> specific question.
>
>
>
> In an open source development model the author of code wants it to be public
> and there is no stealing of ideas. Open source is about providing the source
> of software for public use, review and enhancement, but not about having the
> right for anyone to get support for no money and take a free ride to realize
> low cost commercial offers “just because you can”. The total cost of
> ownership of open source software mainly consists of external support
> efforts or at least of having knowledgeable people on the payroll. Privatize
> profits with offering based on free stuff and socialize cost for support is
> absolutely not on the agenda of open source software because it would mean
> that people working in the industry have an empty fridge.
>
>
>
> Rauls question was VERY specific on a chan_ss7 parameter and its internal
> crunching logic. He should get paid vendor support or trust on the vendor
> goodwill to dedicate time of subsidized people to the list, which Digium
> COULD do here from hardware sales profits but other software-only shops are
> a bit out of luck. I haven’t really seen any Digium staff giving replies
> here so apparently the don’t want to go down that road to push “SS7 at
> home”. Digium is probably commercially better off to dedicate their SS7
> resources to paying OEM customers like Sysmaster.
>
>
>
> Are we now all friends again?
>
>
>
> So long, Florian
>
>
>
>
>
> Von: asterisk-ss7-bounces at lists.digium.com
> [mailto:asterisk-ss7-bounces at lists.digium.com] Im Auftrag von Wasim Baig
> Gesendet: Freitag, 2. September 2011 14:52
>
> An: asterisk-ss7 at lists.digium.com
> Betreff: Re: [asterisk-ss7] Nature of Address chan_SS7
>
>
>
> AFAIK, asterisk-ss7 has had discussions on all SS7 options for asterisk
> including libISUP, lib_ss7, chan_ss7, ss7box, SMG etc ...
>
>
>
> Has the list policy changed to be solely lib_ss7?
>
>
>
> -wasim
>
> On Fri, Sep 2, 2011 at 14:36, <florian at gruendler.net> wrote:
>
> Raul,
>
>
>
> You are on the wrong channel with this question. You question is not
> Asterisk related, much less lib_ss7 related. You ought to ask to the people
> behind chan_ss7. It may be okay to discuss a general mobility topic on a BMW
> list, but you aren’t getting much cheers if you discuss your Mercedes
> problem on the BMW list despite the fact that both are cars.
>
>
>
> Regards, Florian
>
>
>
> PS: If you are a telco and you have local customers being switched to
> another local customer (=physically connected to the same PBX), you
> automatically have a dedicated exchange for that and a separate
> trunk/linkset for non-local calls being sent off to your national or
> international exchange. Nobody would want what you want anyway so what are
> you trying to do here? Is this just an academic lab question or why does
> your network planning require this?
>
>
>
>
>
>
>
> Von: asterisk-ss7-bounces at lists.digium.com
> [mailto:asterisk-ss7-bounces at lists.digium.com] Im Auftrag von Raul Baldeon
> Gesendet: Donnerstag, 1. September 2011 23:42
> An: asterisk-ss7 at lists.digium.com
> Betreff: [asterisk-ss7] Nature of Address chan_SS7
>
>
>
> Hello list,
>
> I have an issue with chan_ss7. My current configuration only support
> national calls or local calls; (I can switch changing the parameter noa from
> linkset).
> Is there a way to work with both of them?
>
> Here you are my configuration:
>
> [linkset-siuc]
> enabled => yes
> enable_st => no
> ;use_connect => yes
> use_connect => no; When use_connect = yes; There is no ringback in SS7 ->
> SIP
> hunting_policy => even_mru
> context => ss7
> language => da
> t35 => 15000,timeout
> subservice => auto
> variant => ITU
> noa => 0x1; (0x1 => for local calls and 0x2 for national calls)
>
> [link-l1]
> linkset => siuc
> channels => 1-15,17-31
> schannel => 16
> firstcic => 1
> enabled => yes
> sltm => no
>
>
> [host-mihost]
> enabled => yes
> opc => 0x391
> dpc => siuc:012
> links => l1:1                         ;span 1 of dahdi/system.conf
> globaltitle => 0x00, 0x00, 0x01, 114509090
> ssn => 7
>
> Best Regards
>
> Raúl
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
>
> --
> wasim h. baig | principal consultant | convergence pk | +92 30 0850 8070 |
> peace be upon you ...
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>