[asterisk-ss7] how can i see the ss7 signaling from Digium Card

[Torrey Searle]

You cannot use teherreal to capture ss7 packets.  you must install
libpcap-0.8-dev (wich will probably mean you need to upgrade to tshark)/

Then you need to compile and use the dahdi_pcap tool.  The pcaps generated
by dahdi_pcap can be viewed by tshark/wiresharki


The dahdi_tool application can be downloaded here

https://issues.asterisk.org/jira/browse/DAHTOOL-49

Torrey

On 16 October 2011 08:46, rubel pool <rubel_ete at yahoo.com> wrote:

> after using dahdi_pcap patch i have save abc.pcap file. but it has run on
> Wireshark and shows only SSH protocol information... But i need SS7
> information...
>
> i also used this   /usr/bin/tethereal -V -w abcd.pcap      to capture the
> ss7 information but there also show the SSH information... Please help me to
> find out SS7 Information.....
>
> ***Regards*
> **
> *Saleh*
>
> ------------------------------
> *From:* Abdul Basit <basit.engg at gmail.com>
> *To:* rubel pool <rubel_ete at yahoo.com>; asterisk-ss7 at lists.digium.com
> *Sent:* Thursday, October 13, 2011 7:18 PM
>
> *Subject:* Re: [asterisk-ss7] how can i see the ss7 signaling from Digium
> Card
>
> Use dahdi_pcap patch to save .pcap file.
>
> or simply use ss7 debug
>
>
> On Thu, Oct 13, 2011 at 5:41 PM, rubel pool <rubel_ete at yahoo.com> wrote:
>
> I am using asterisk version 1.8.3.3 and for ss7 : chan_dhadi
>
> ***Regards*
> **
> *Saleh*
>
> ------------------------------
> *From:* Nyamul Hassan <nyamul at gmail.com>
> *To:* Asterisk SS7 List <asterisk-ss7 at lists.digium.com>
> *Sent:* Thursday, October 13, 2011 6:20 PM
> *Subject:* Re: [asterisk-ss7] how can i see the ss7 signaling from Digium
> Card
>
> What is asterisk version?  Which SS7 are you running?  Chan_SS7 or LibSS7?
>
> Regards
> HASSAN
>
>
>
> On Thu, Oct 13, 2011 at 18:15, rubel pool <rubel_ete at yahoo.com> wrote:
>
> Dear all,
>
> I am using digium card for single E1. where all signalling is running good,
> but sometime calls are blocked or not routed. so i want to see the ss7
> signalling process. please help me to show the every step of signalling.If
> there any software, please  inform me. i have several time used the
> Wireshark but wireshark does not support the digium card...
>
> ***Regards*
> **
> *Saleh*
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
>
>
> --
> Regards,
>
> Abdul Basit | +92 32 1416 4196 | +92 30 0841 1445
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20111017/f70a028c/attachment-0001.htm>