[asterisk-ss7] DAHDI_SPANCONFIG failed on span 9: Invalid argument (22)

[Vashkar Chatterjee]

Check the jumper settings on the e1 card that sets e1 or t1

-Vashkar
On Jul 24, 2011 9:25 PM, "Dave George" <dgeorge at teletoneinc.com> wrote:
> Seems the card on span 9 switched from T1 to E1 after power failed. How do
> I set it back to T1 using config?
>
>
>
> Dave
>
>
>
>
>
>
>
> From: Dave George [mailto:dgeorge at teletoneinc.com]
> Sent: Sunday, July 24, 2011 11:22 AM
> To: 'asterisk-ss7 at lists.digium.com'
> Subject: DAHDI_SPANCONFIG failed on span 9: Invalid argument (22)
>
>
>
> System was up and running well for over a year. I had a power outage and
> now I cannot get my SS7 back up.
>
>
>
>
>
> service dahdi restart
>
> Unloading DAHDI hardware modules: done
>
> Loading DAHDI hardware modules:
>
> wct4xxp: [ OK ]
>
>
>
> Running dahdi_cfg: DAHDI_SPANCONFIG failed on span 9: Invalid argument
(22)
>
> [FAILED]
>
>
>
>
>
>
>
>
>
>
>
> Channel 288: Clear channel (Default) (Echo Canceler: none) (Slaves: 288)
>
>
>
> 288 channels to configure.
>
>
>
> DAHDI_SPANCONFIG failed on span 9: Invalid argument (22)
>
>
>
> Any advice welcome.
>
>
>
>
>
> System.conf
>
> span=1,1,0,esf,b8zs
>
> bchan=2-24
>
> mtp2=1
>
>
>
> span=2,1,0,esf,b8zs
>
> bchan=26-48
>
> mtp2=25
>
>
>
> span=3,1,0,esf,b8zs
>
> bchan=49-72
>
>
>
> span=4,1,0,esf,b8zs
>
> bchan=73-96
>
>
>
> span=5,1,0,esf,b8zs
>
> bchan=97-120
>
>
>
> span=6,1,0,esf,b8zs
>
> bchan=121-144
>
>
>
> span=7,1,0,esf,b8zs
>
> bchan=145-168
>
>
>
> span=8,1,0,esf,b8zs
>
> bchan=169-192
>
>
>
> span=9,1,0,esf,b8zs
>
> bchan=193-216
>
>
>
> span=10,1,0,esf,b8zs
>
> bchan=217-240
>
>
>
> span=11,1,0,esf,b8zs
>
> bchan=241-264
>
>
>
> span=12,1,0,esf,b8zs
>
> bchan=265-288
>
>
>
> Dave
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20110724/670b8bb3/attachment.htm>