[asterisk-ss7] E1 configuration params

[bipin singh]

On Tue, Jan 11, 2011 at 11:27 PM, Benaiad <benaiad at gmail.com> wrote:

>
> On Jan 10, 2011 9:59 AM, "Wasim Baig" <wasim at convergence.pk> wrote:
> >
> > On Sun, Jan 9, 2011 at 23:18, Benaiad <benaiad at gmail.com> wrote:
> >>
> >> Hi,
> >>
> >> ;First of all, I'm newbie in this field, so please forgive
> my unprofessional explanation.
> >>
> >>
> >> I'm trying to connect to a mobile operator with chan_ss7 using sangoma
> card.
> >> the telecom regulator initiated an SPC code for us
> >> Now, the operator's engineer asked me for the following parameters:
> >> OPC , Link type , TS , SLC.
> >
> >
> > Ideally, they should give a Point Code for you as well, if they don't,
> you can choose any
> > arbitrary figure like "1234" or "1" or "69".
>
> But where do i configure the SPC then?
>
> configure in linkset

> >
> >>
> >> but I don't know what should I provide to him.
> >> I think the OPC similar to our SPC, And the Link type is 64k,
> >> But for TS and SLC, I don't know what to say.
> >
> >
> > TS is the timeslot/chan on which you will send signalling. On each E1 you
> have 31 TS.
> > Normally 16 is used, although you can use any 1 to 31.
> >
> > Use SLC=0 for the first link.
> >
>
> Thanks  a lot, shokran, merci, gratci.
>
> Regards,
> --
> Benaiad
>
> >
> >
> >
> >
> > --
> > wasim h. baig | principal consultant | convergence pk | +92 30 0850 8070
> | peace be upon you
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>



-- 
BIPIN RAGHUVANSHI
OPERATION HEAD
ASTERISK (DEVELOPMENT AND RESEARCH)
WWW.EHORIZONS.IN
011-32323262
011-46334633
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20110113/f78c3614/attachment.htm>