[asterisk-ss7] E1 configuration params

[Wasim Baig]

On Sun, Jan 9, 2011 at 23:18, Benaiad <benaiad at gmail.com> wrote:

> Hi,
>
> ;First of all, I'm newbie in this field, so please forgive
> my unprofessional explanation.
>

> I'm trying to connect to a mobile operator with chan_ss7 using sangoma
> card.
> the telecom regulator initiated an SPC code for us
> Now, the operator's engineer asked me for the following parameters:
> OPC , Link type , TS , SLC.
>

Ideally, they should give a Point Code for you as well, if they don't, you
can choose any
arbitrary figure like "1234" or "1" or "69".


> but I don't know what should I provide to him.
> I think the OPC similar to our SPC, And the Link type is 64k,
> But for TS and SLC, I don't know what to say.
>

TS is the timeslot/chan on which you will send signalling. On each E1 you
have 31 TS.
Normally 16 is used, although you can use any 1 to 31.

Use SLC=0 for the first link.


>
> I appreciate and applaud your help and concern.
>
> Thank you all.
>
> Regards,
> --
> Benaiad
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>



-- 
wasim h. baig | principal consultant | convergence pk | +92 30 0850 8070 |
peace be upon you ...
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20110110/4259faa8/attachment.htm>