[asterisk-ss7] Using LIBSS7 on a TDMoE environment

[Kaloyan Kovachev]

Hi,

On Fri, 11 Feb 2011 09:28:20 +0100, mosbah abdelkader
<mosbah.abdelkader at gmail.com> wrote:
> Hi,
> 
> 
> 
> Is it possible to configure TDMoE for Asterisk and DAHDI without using a
> DAHDI hardware.
> 
> 
> 
> If yes, please give some explanation.
> 

 yes it is possible.
 In dahdi/system.conf you configure a dynamic span like:

#       To Ast 2
dynamic=eth,eth0/<MAC_of_Ast2>,31,0
dchan=16
bchan=1-15,17-31

in the second system (asuming that Ast1 will provide the timing)
#       To Ast 1
dynamic=eth,eth0/<MAC_of_Ast1>,31,1
dchan=16
bchan=1-15,17-31

and you use the span just lik you would use a hardware span.
The example is for a typical PRI setup, but with dynamic spans you may
have 124 chans (or more) in a single dynamic device:

dynamic=eth,eth0/<MAC_of_the_remote>,124,0
dchan=1
bchan=2-124

> 
> --
> BR
> Abdelkader Mosbah.