[asterisk-ss7] Testing libss7 with one PCI card in loopback

[Robert Thomas]

You could use a cross over cable. I have tested this to bring up the Linkset
and place calls across.

A cross over cable is the best Telco simulator you can get.

On Tue, Apr 26, 2011 at 6:27 PM, Marcelo Pacheco <marcelo at m2j.com.br> wrote:

>  On 04/26/11 18:18, Jean Louis David wrote:
>
> Hi,
> because E1 cards are quite expensive, and before connecting to PSTN,  i
> would like to test good working of asterisk + libss7 by looping back 2 E1
> ports of  the same PCI Card (for example : one TE410P). I will connect two
> SIP phones for test purposes.
> Do you think it is a good test ?
> Could i define a little dialplan to test SIP to SS7 and SS7 to SIP ?
>
> Thanks,
> Jean-Louis.
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>  Use TDMoE. You can use it between two hosts with a good gigabit switch or
> a 100Mbps crossover link (just my personal standard). It can also be done
> using local TDMoE.
> Google is your friend, there's plenty of Asterisk+TDMoE documentation on
> the internet.
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>



-- 
Robert
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20110426/b43cdf7b/attachment.htm>