[asterisk-ss7] Specify T1 in Dial(Dahdi)

[Mitul Limbani]

You need to define groups just below the channel definition n then seperate the second listing with a line feed. 

Mitul 

Dave George <dgeorge at teletoneinc.com> wrote:

>I have 11 T1s.  I am doing signaling on T1-1 and T1-2 (slot 1 on both
>T1s).
>
>Group is specified at a higher level than Linkset.  Do I have to add new
>linksets for each group?  Or do I simply do the following:
>
>; All settings apply to linkset 1
>linkset = 1
>pointcode = 002-157-001
>adjpointcode = 001-163-000
>defaultdpc = 001-163-000
>slc=0
>sigchan = 1
>cicbeginswith = 102
>channel = 2-24
>
>slc=1
>sigchan = 25
>cicbeginswith = 126
>channel = 26-48
>
>group = 1
>cicbeginswith = 801
>channel = 49-72
>
>group = 2
>cicbeginswith = 401
>channel = 73-96
>
>group = 3
>cicbeginswith = 201
>channel = 97-120
>
>group = 4
>cicbeginswith = 901
>channel = 121-144
>
>group = 5
>cicbeginswith = 601
>channel = 145-168
>
>group = 6
>cicbeginswith = 949
>channel = 169-192
>
>group = 7
>cicbeginswith =701
>channel = 193-216
>
>group = 8
>cicbeginswith = 501
>channel = 217-240
>
>group = 9
>cicbeginswith = 225
>channel = 241-264
>
>
>Dave George
>Teletone Inc.
>561 674 3838
>
>> -------- Original Message --------
>> Subject: Re: [asterisk-ss7] Specify T1 in Dial(Dahdi)
>> From: Mitul Limbani  <mitul at enterux.com>
>> Date: Wed, October 27, 2010 10:37 pm
>> To: asterisk-ss7 at lists.digium.com
>> 
>> Add 
>> 
>> group =0
>> group =1
>> group = 2
>> group = 3
>> 
>> For each T1 line definition in chan_dahdi.conf 
>> N then access it from dial plan as 
>> 
>> Dial(DAHDI/g0/${EXTEN}
>> g1, g2, g3 ....
>> 
>> Hope that helps 
>> 
>> Regards,
>> Mitul Limbani 
>> Enterux Solutions 
>> 
>> Dave George <dgeorge at teletoneinc.com> wrote:
>> 
>> >I need to specify which T1 the calls goes out on.  Is there a
>> >Dial(Dahdi) option to specify the T1?  
>> >
>> >
>> >This is what my chan_dahdi.conf looks like:
>> >; All settings apply to linkset 1
>> >linkset = 1
>> >pointcode = x-x-x
>> >adjpointcode = x-x-x
>> >defaultdpc = x-x-x
>> >
>> >slc=0
>> >sigchan = 1
>> >cicbeginswith = 102
>> >channel = 2-24
>> >
>> >slc=1
>> >sigchan = 25
>> >cicbeginswith = 126
>> >channel = 26-48
>> >
>> >cicbeginswith = 801
>> >channel = 49-72
>> >
>> >cicbeginswith = 401
>> >channel = 73-96
>> >
>> >cicbeginswith = 201
>> >channel = 97-120
>> >
>> >cicbeginswith = 901
>> >channel = 121-144
>> >
>> >cicbeginswith = 601
>> >channel = 145-168
>> >
>> >cicbeginswith = 949
>> >channel = 169-192
>> >
>> >cicbeginswith =701
>> >channel = 193-216
>> >
>> >cicbeginswith = 501
>> >channel = 217-240
>> >
>> >cicbeginswith = 225
>> >channel = 241-264
>> >
>> >
>> >Thanks,
>> >
>> >-- 
>> >_____________________________________________________________________
>> >-- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> >
>> >asterisk-ss7 mailing list
>> >To UNSUBSCRIBE or update options visit:
>> >   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>> -- 
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> 
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>-- 
>_____________________________________________________________________
>-- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
>asterisk-ss7 mailing list
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-ss7