[asterisk-ss7] Asterisk, Taqua T7000, and you guessed it, SS7

[Paul Timmins]

Awesome. Mystery solved, and everyone learned something on the way :)

Bryan Scott wrote:
> On May 3, 2010, at 11:11 AM, Matthew Fredrickson wrote:
>   
>> Bryan Scott wrote:
>>     
>>> They do match.... I have them separated by "pointcode"...
>>>
>>> Switched back to 1.6.2.6 (1.6.1.18 was giving me grief on some SIP RTP stuff).
>>>
>>>
>>> On Mon, May 3, 2010 at 6:36 AM, Paul Timmins <paul at timmins.net> wrote:
>>>       
>>>> Why do defaultdpc and adjpointcode not match? Do you have an stp between?
>>>>         
>> Can you post a debug of the messages using "ss7 debug linkset x" where x 
>> is the linkset number?
>>
>>
>>     
>
> UGHHH!H!H!!!
>
> Ok.  Well, in troubleshooting everything *else*, I neglected to take a close look at the point codes.  Yeah.... I put a 2 where I should have put a 7.  Changed that, reloaded chan_dahdi, and voila:
>
> ====================
>
>  Loaded chan_dahdi.so => (DAHDI Telephony Driver w/PRI & SS7)
>   == Primary D-Channel on span 1 up
> MTP2 link up (SLC 0)
> --- SS7 Up ---
> Resetting CICs 25 to 47
> Got reset acknowledgement from CIC 25 to 47.
>
> ====================
>
>
> And all alarms have cleared on the switch and tests are passing:
>
>
> ====================
> << Query Circuit ...
> <<      PC: 1 - 1 - 10,  CIC: 00025
>   
>>>              T7000 ISUP Circuit Query
>>>
>>> Circuit   Near End State        Far End State
>>> ***************************************************
>>>  0025     idle                   idle                
>>>       
> << Query Circuit Range ...
> <<      PC: 1 - 1 - 10,  CIC: 00025, 00026, 00027, 00028, 00029, 00030, 00031, 00032, 00033, 00034, 00035, 00036, 00037, 00038, 00039, 00040, 00041, 00042, 00043, 00044, 00045, 00046, 00047
>   
>>>              T7000 ISUP Circuit Query
>>>
>>> Circuit   Near End State        Far End State
>>> ***************************************************
>>>  0025     idle                   idle                
>>>  0026     idle                   idle                
>>>  0027     transient              idle                
>>>  0028     transient              idle                
>>>  0029     transient              idle                
>>>  0030     transient              idle                
>>>  0031     transient              idle                
>>>  0032     transient              idle                
>>>  0033     transient              idle                
>>>  0034     transient              idle                
>>>  0035     transient              idle                
>>>  0036     transient              idle                
>>>  0037     transient              idle                
>>>  0038     transient              idle                
>>>  0039     transient              idle                
>>>  0040     transient              idle                
>>>  0041     transient              idle                
>>>  0042     transient              idle                
>>>  0043     transient              idle                
>>>  0044     transient              idle                
>>>  0045     transient              idle                
>>>  0046     transient              idle                
>>>  0047     transient              idle                
>>>       
>
> << Circuit Continuity Check Request ...
> <<      PC: 1 - 1 - 10,  CIC: 00047
>   
>>> ---------------------------------------------------
>>>               T7000 ISUP COT PASSED  			    
>>> 	PC:CIC (1-1-10:47), CID: (22)
>>> ---------------------------------------------------
>>>       
>
>
> << Test Circuit ...
> <<      PC: 1 - 1 - 10,  CIC: 00047
>   
>>>          OCX Circuit Validation Test
>>> ************************************************
>>>  circuit 47 success.
>>>  Circuit Group Carrier ->  unknown
>>>  Double Seizing Control ->  none
>>>  Alarm Carrier ->  unknown
>>>  Cot Check Req -> unknown
>>>       
> << Reset Circuit ...
> <<      PC: 1 - 1 - 10,  CIC: 00047
>
>
>
>
>