[asterisk-ss7] Asterisk, Taqua T7000, and you guessed it, SS7

[Bryan Scott]

On May 3, 2010, at 11:11 AM, Matthew Fredrickson wrote:
> 
> Bryan Scott wrote:
>> They do match.... I have them separated by "pointcode"...
>> 
>> Switched back to 1.6.2.6 (1.6.1.18 was giving me grief on some SIP RTP stuff).
>> 
>> 
>> On Mon, May 3, 2010 at 6:36 AM, Paul Timmins <paul at timmins.net> wrote:
>>> Why do defaultdpc and adjpointcode not match? Do you have an stp between?
> 
> Can you post a debug of the messages using "ss7 debug linkset x" where x 
> is the linkset number?
> 
> 

UGHHH!H!H!!!

Ok.  Well, in troubleshooting everything *else*, I neglected to take a close look at the point codes.  Yeah.... I put a 2 where I should have put a 7.  Changed that, reloaded chan_dahdi, and voila:

====================

 Loaded chan_dahdi.so => (DAHDI Telephony Driver w/PRI & SS7)
  == Primary D-Channel on span 1 up
MTP2 link up (SLC 0)
--- SS7 Up ---
Resetting CICs 25 to 47
Got reset acknowledgement from CIC 25 to 47.

====================


And all alarms have cleared on the switch and tests are passing:


====================
<< Query Circuit ...
<<      PC: 1 - 1 - 10,  CIC: 00025
>> 
>>              T7000 ISUP Circuit Query
>> 
>> Circuit   Near End State        Far End State
>> ***************************************************
>>  0025     idle                   idle                
<< Query Circuit Range ...
<<      PC: 1 - 1 - 10,  CIC: 00025, 00026, 00027, 00028, 00029, 00030, 00031, 00032, 00033, 00034, 00035, 00036, 00037, 00038, 00039, 00040, 00041, 00042, 00043, 00044, 00045, 00046, 00047
>> 
>>              T7000 ISUP Circuit Query
>> 
>> Circuit   Near End State        Far End State
>> ***************************************************
>>  0025     idle                   idle                
>>  0026     idle                   idle                
>>  0027     transient              idle                
>>  0028     transient              idle                
>>  0029     transient              idle                
>>  0030     transient              idle                
>>  0031     transient              idle                
>>  0032     transient              idle                
>>  0033     transient              idle                
>>  0034     transient              idle                
>>  0035     transient              idle                
>>  0036     transient              idle                
>>  0037     transient              idle                
>>  0038     transient              idle                
>>  0039     transient              idle                
>>  0040     transient              idle                
>>  0041     transient              idle                
>>  0042     transient              idle                
>>  0043     transient              idle                
>>  0044     transient              idle                
>>  0045     transient              idle                
>>  0046     transient              idle                
>>  0047     transient              idle                

<< Circuit Continuity Check Request ...
<<      PC: 1 - 1 - 10,  CIC: 00047
>> 
>> ---------------------------------------------------
>>               T7000 ISUP COT PASSED  			    
>> 	PC:CIC (1-1-10:47), CID: (22)
>> ---------------------------------------------------


<< Test Circuit ...
<<      PC: 1 - 1 - 10,  CIC: 00047
>>          OCX Circuit Validation Test
>> ************************************************
>>  circuit 47 success.
>>  Circuit Group Carrier ->  unknown
>>  Double Seizing Control ->  none
>>  Alarm Carrier ->  unknown
>>  Cot Check Req -> unknown
<< Reset Circuit ...
<<      PC: 1 - 1 - 10,  CIC: 00047