[asterisk-ss7] Issue with Interconnect

Wed Dec 15 11:03:48 UTC 2010

all are Idle

and


[Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received
CIC=63 for unequipped circuit (typ=RSC), link 'l2'.
[Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received
CIC=60 for unequipped circuit (typ=RSC), link 'l2'.
[Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received
CIC=62 for unequipped circuit (typ=RSC), link 'l2'.
[Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received
CIC=56 for unequipped circuit (typ=RSC), link 'l2'.
[Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received
CIC=61 for unequipped circuit (typ=RSC), link 'l2'.
[Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received
CIC=57 for unequipped circuit (typ=RSC), link 'l2'.
[Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received
CIC=58 for unequipped circuit (typ=RSC), link 'l2'.
[Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received
CIC=59 for unequipped circuit (typ=RSC), link 'l2'.


Kind regards


On Wed, Dec 15, 2010 at 11:11 AM, Amish <amish at 3g.co.za> wrote:
> Hi Edrich,
>
> What is the current status of those CICs, with ss7 linestat?
> Idle, Remote Maintenance Blocked, ...
> What messages are displayed on the console?
>
> A.
>
>
> On 12/14/2010 03:52 PM, Edrich de Lange wrote:
>>
>> Good morning
>>
>> I have an issue on one of the links where I have the last 8 cics not
>> functioning.
>>
>> Can anyone provide details on what may cause this? It works perfectly
>> fine on my other link.
>>
>> I have had the provider also check all their termination equipment,
>> and that seems to not be the issue. the card has been replaced aswell.
>>
>>
>> Kind regards
>>
>>
>> On Mon, Dec 13, 2010 at 10:41 AM, Edrich de Lange<edd at edd.za.net>  wrote:
>>>
>>> Oh, Im using chan_ss7 now.
>>>
>>> Those channels are up on my side though.(says idle)
>>>
>>> Kind regards
>>>
>>> On Mon, Dec 13, 2010 at 10:40 AM, Edrich de Lange<edd at edd.za.net>  wrote:
>>>>
>>>> Ok, its working fine.
>>>>
>>>> One problem, for some reason the last 8 cics dont come up on the
>>>> remote side, and after a while Im getting these errors
>>>>
>>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received
>>>> CIC=59 for unequipped circuit (typ=RSC), link 'l1'.
>>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received
>>>> CIC=56 for unequipped circuit (typ=RSC), link 'l1'.
>>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received
>>>> CIC=60 for unequipped circuit (typ=RSC), link 'l1'.
>>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received
>>>> CIC=62 for unequipped circuit (typ=RSC), link 'l1'.
>>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received
>>>> CIC=63 for unequipped circuit (typ=RSC), link 'l1'.
>>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received
>>>> CIC=61 for unequipped circuit (typ=RSC), link 'l1'.
>>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received
>>>> CIC=58 for unequipped circuit (typ=RSC), link 'l1'.
>>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received
>>>> CIC=57 for unequipped circuit (typ=RSC), link 'l1'.
>>>>
>>>>
>>>> Kind regards
>>>>
>>>> On Sat, Dec 11, 2010 at 8:01 AM, bipin singh<bipinraghuvanshi at gmail.com>
>>>>  wrote:
>>>>>
>>>>> Hi
>>>>>          Try it
>>>>>
>>>>> adjpointcode=1368
>>>>>     defaultdpc=1368
>>>>>
>>>>> and also not set same acp dcp for two links .
>>>>>
>>>>> On Fri, Dec 10, 2010 at 11:11 PM, Edrich de Lange<edd at edd.za.net>
>>>>>  wrote:
>>>>>>
>>>>>> Good day
>>>>>>
>>>>>> I have a setup using a 4 port Digium Card,Asterisk
>>>>>> 1.6.2.15,libss7-1.0.2,dahdi-linux-complete-2.4.0
>>>>>>
>>>>>> My dahdi config looks like so :
>>>>>>
>>>>>> # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS/CRC4
>>>>>> span=2,2,0,ccs,hdb3
>>>>>> # termtype: te
>>>>>> bchan=32-46,48-62
>>>>>> mtp2=47
>>>>>> #echocanceller=mg2,32-46,48-62
>>>>>>
>>>>>> (the other spans are disabled)
>>>>>>
>>>>>> [channels]
>>>>>> signaling=ss7                    ;this is ss7 signaling
>>>>>> ss7type=itu                       ;using the ITU variant
>>>>>> ;ss7_called_nai=dynamic           ;NAI for outgoing calls
>>>>>> ;ss7_calling_nai=dynamic          ;NAI for incoming calls
>>>>>> ss7_internationalprefix= ;international prefix value for incoming
>>>>>> calls
>>>>>> ss7_nationalprefix=            ;national prefix value for incoming
>>>>>> calls
>>>>>> ss7_subscriberprefix=            ;subscriber prefix value for incoming
>>>>>> calls
>>>>>> ss7_unknownprefix=              ;unknown prefix value for incoming
>>>>>> calls
>>>>>> ss7_explicitacm=yes
>>>>>> ss7_explictacm=yes
>>>>>>
>>>>>> group=1
>>>>>> context=ss7
>>>>>> linkset=1
>>>>>> pointcode=720                      ;the point code for this
>>>>>> system...aka
>>>>>> SPC
>>>>>> adjpointcode=1832                   ;the point code for the system
>>>>>> that we are signaling to... aka APC
>>>>>> defaultdpc=1368                     ;the point code for the system
>>>>>> that the CICs will be negotiated with...aka DPC
>>>>>> networkindicator=national_spare  ;NI value for MTP3
>>>>>> cicbeginswith=32                  ;the starting value of the CICs
>>>>>> channel=32-46
>>>>>> cicbeginswith=48
>>>>>> channel=48-62                    ;the channels that are CICs
>>>>>> sigchan=47                      ;the signaling channel
>>>>>>
>>>>>> The Links come up. It seems fine.
>>>>>> When I make a call to the link I get the following on the asterisk CLI
>>>>>> Unhandled optional parameter 0x8 'Optional forward call indicator'
>>>>>> [0x0 ]
>>>>>> Unhandled optional parameter 0x31 'Propagation Delay Counter'
>>>>>> [0x0 0x5a ]
>>>>>> Unhandled optional parameter 0x3f 'Location Number'
>>>>>> [0x84 0x93 0x72 0x38 0x0 0x10 0x7 0x0 0x0 0x0 ]
>>>>>> Unhandled optional parameter 0x39 'Parameter Compatibility
>>>>>> Information'
>>>>>> [0x31 0xd0 0x3f 0xc0 ]
>>>>>> [Dec 10 19:36:12] WARNING[3627]: chan_dahdi.c:11850 ss7_linkset: IAM
>>>>>> on unconfigured CIC 6
>>>>>> [Dec 10 19:36:13] WARNING[3627]: chan_dahdi.c:12142 ss7_linkset: RLC
>>>>>> on unconfigured CIC 6
>>>>>>
>>>>>> It doesnt seem to trigger even the extentions.
>>>>>>
>>>>>> I cant get the Chan_ss7 to work, as My DPC and APC are different(if im
>>>>>> mistaken please assist, I would gladly try chan_ss7)
>>>>>>
>>>>>> I just need to get the incoming calls working urgently.
>>>>>>
>>>>>> Any assistance will be greatly appreciated.
>>>>>>
>>>>>> Kind regards
>>>>>>
>>>>>> Edrich de Lange
>>>>>>
>>>>>> --
>>>>>> _____________________________________________________________________
>>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>>
>>>>>> asterisk-ss7 mailing list
>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>>>>
>>>>>
>>>>> --
>>>>> BIPIN RAGHUVANSHI
>>>>> OPERATION HEAD
>>>>> ASTERISK (DEVELOPMENT AND RESEARCH)
>>>>> WWW.EHORIZONS.IN
>>>>> 011-32323262
>>>>> 011-46334633
>>>>>
>>>>> --
>>>>> _____________________________________________________________________
>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>
>>>>> asterisk-ss7 mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>>>>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>  http://lists.digium.com/mailman/listinfo/asterisk-ss7
>