[asterisk-ss7] MATTF libss7
Domjan Attila
adomjan at tvnet.hu
Wed Nov 18 13:56:47 CST 2009
Hi,
I think u got TRA with wrong SLS, the stp which are u connected 2 is
missconfigured...
workaround: set mtp3 t19 timer to 1ms....
On Wed, 2009-11-18 at 18:30 +0200, Kaloyan Kovachev wrote:
> Hello Domian,
> i have a similar (almost sure _the same_) problem:
> at least in my case i got TRA, but instead of:
>
> "OPC XXX DPC YYY SLS 0" it was to "OPC XXX DPC YYY SLS 2" also i get some TFP
> and TFA to diferent SLS like 4, 6, 11, 13
>
> while STD_TEST messages are correctly replied to "OPC XXX DPC YYY SLS 0", so
> the link remained as:
> "Adjecent SP PC: XXX STATE: DOWN"
> but
> "State: INSERVICE, UP"
>
> unfortunately i can't find the full debug log right now, but will keep
> searching where it was saved :(
>
> On Wed, 18 Nov 2009 17:14:43 +0100, Attila Domjan wrote
> > interesting, have u got TRA messages?
> > The linkset was in operational state?
> > please send me the current chan_dahdi.conf
> >
> > On Wed, 2009-11-18 at 17:05 +0100, Erik Wartusch wrote:
> > > Hello Attila!
> > >
> > > I can send you what happend if they switched off the link via software
> > > command (Siemens EWSD). (see txt attached).
> > >
> > > Im afraid I dont have the output of "ss7 show linkset 1". but Im pretty
> > > sure it was like this (when the link was set to down from their side):
> > >
> > > ss7 show
> > > calls cics linkset
> > > srv27*CLI> ss7 show linkset 1
> > > SS7 flags: 0x0
> > > SS7 linkset 1 status: Down
> > > SS7 calling nai: -1
> > > SS7 called nai: -1
> > > SS7 nationalprefix:
> > > SS7 internationalprefix:
> > > SS7 unknownprefix:
> > > SS7 networkroutedprefix:
> > > SS7 subscriberprefix:
> > > Switch type: ITU
> > > Our point code: 4297
> > > SLS shift: 0
> > > numlinks: 1
> > > numsps: 1
> > > ---------------------------------
> > > Adjecent SP PC: 5921 STATE: Down
> > > TRA: GOT SENT T19: not running T21: not running
> > > Routes:
> > > DPC State T6 T10
> > > Link SLC: 0 NetMngSLS: 0
> > > State: INSERVICE, UP
> > > STD Test: passed
> > > Got, sent :
> > > Inhibit:
> > > Changeover: NO
> > > Tx buffer: 0
> > > Tx queue: 0
> > > Retrans pos 0
> > > CO buffer: 0
> > > CB buffer: 0
> > > Last FSN: 71
> > > MTP3timers: Q707_T2(12s) [here im not sure this was running)
> > >
> > > So sadly we got today again a negative result (test not passed) of the
> > > czech telco so we can not go live with the SS7 link...
> > >
> > > Kind Regards,
> > > Erik
> > >
> > >
> > > Am Mittwoch, den 11.11.2009, 16:10 +0100 schrieb Attila Domjan:
> > > > Hmm, it is interesting...
> > > >
> > > > static void t2_expiry(void * data)
> > > > {
> > > > struct mtp2 *link = data;
> > > >
> > > > mtp2_setstate(link, MTP_IDLE);
> > > >
> > > > return;
> > > > }
> > > >
> > > >
> > > > int mtp2_setstate(struct mtp2 *link, int newstate)
> > > > ....
> > > > case MTP_IDLE:
> > > > link->t2 = ss7_schedule_event(link->master, link->timers.t2,
> > > > t2_expiry, link);
> > > > if (mtp2_lssu(link, LSSU_SIO)) {
> > > > mtp_error(link->master, "Unable to transmit initial LSSU\n");
> > > > return -1;
> > > > }
> > > > link->state = MTP_NOTALIGNED;
> > > > return 0;
> > > >
> > > > it is coded, periodically send SIO....
> > > >
> > > > what is the link state in this case? (ss7 show linkset ...)
> > > >
> > > > A
> > > >
> > > > On Wed, 2009-11-11 at 15:46 +0100, Erik Wartusch wrote:
> > > > > Hi Attila!
> > > > >
> > > > > I like your version. Thanks. Still I have problems to pass a MTP level 2
> > > > > test wanted by a czech telco.
> > > > >
> > > > > It's regarding sending SIO / SIOS messages when the other sites link is
> > > > > down (during the specified T2 timer). They claim we sending not
> > > > > periodically the SIO messages (just once) until the T2 timer is running
> > > > > out.
> > > > >
> > > > > Any experience with that?
> > > > >
> > > > > Kind Regards,
> > > > > Erik
> > > > >
> > > > > Am Dienstag, den 10.11.2009, 11:30 +0100 schrieb Attila Domjan:
> > > > > > Hi, don't mix the libss7/asterisk(chan_dahdi) versions, there are some
> > > > > > api changes.
> > > > > >
> > > > > > My version (many additional features) are working from my svn.
> > > > > >
> > > > > > Regards,
> > > > > > Attila
> > > > > >
> > > > > > On Mon, 2009-11-09 at 17:35 +0100, Erik Wartusch wrote:
> > > > > > > Hello ss7 list!
> > > > > > >
> > > > > > > Installing libss7 and asterisk from
> > > > > > > http://svn.digium.com/svn/libss7/team/mattf/bug13495
> > > > > > >
> > > > > > > http://svn.digium.com/svn/asterisk/team/mattf/bug13495
> > > > > > >
> > > > > > > as well as:
> > > > > > > http://svn.digium.com/svn/dahdi/tools/trunk dahdi-tools
> > > > > > > http://svn.digium.com/svn/dahdi/linux/trunk dahdi-trunk
> > > > > > >
> > > > > > > (this order: dahdi, dahdi-tools, libss7 and then asterisk)
> > > > > > >
> > > > > > > leads to the follwing error doing a "make" for the Asterisk
> version (see below).
> > > > > > > Did I made any mistake or is this a bug?
> > > > > > >
> > > > > > > Kind Regards,
> > > > > > >
> > > > > > > Erik
> > > > > > >
> > > > > > > [CC] chan_dahdi.c -> chan_dahdi.o
> > > > > > > chan_dahdi.c: In function ‘ss7_linkset’:
> > > > > > > chan_dahdi.c:10921: error: ‘ss7_event_iam’ has no member named
> > > > > > > ‘cot_performed_on_previous_cic’
> > > > > > > chan_dahdi.c:10921: error: ‘ss7_event_sam’ has no member named
> > > > > > > ‘cot_performed_on_previous_cic’
> > > > > > > chan_dahdi.c:10929: error: ‘ss7_event_iam’ has no member named
> > > > > > > ‘cot_performed_on_previous_cic’
> > > > > > > chan_dahdi.c:10947: error: ‘ss7_event_cot’ has no member named
> > > > > > > ‘cot_performed_on_previous_cic’
> > > > > > > chan_dahdi.c: In function ‘process_dahdi’:
> > > > > > > chan_dahdi.c:16660: error: ‘SS7_ISDN_ACCESS_INDICATOR’ undeclared
> (first
> > > > > > > use in this function)
> > > > > > > chan_dahdi.c:16660: error: (Each undeclared identifier is reported
> only
> > > > > > > once
> > > > > > > chan_dahdi.c:16660: error: for each function it appears in.)
> > > > > > > make[1]: *** [chan_dahdi.o] Error 1
> > > > > > > make: *** [channels] Error 2
> > > > > > > srv27:/usr/src/UNSTABLE_libss7/asterisk-patched# cd ..
> > > > > > >
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> > > > > > >
> > > > > > > asterisk-ss7 mailing list
> > > > > > > To UNSUBSCRIBE or update options visit:
> > > > > > > http://lists.digium.com/mailman/listinfo/asterisk-ss7
> > > > >
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 197 bytes
Desc: This is a digitally signed message part
Url : http://lists.digium.com/pipermail/asterisk-ss7/attachments/20091118/8c292c61/attachment.pgp
More information about the asterisk-ss7
mailing list